I have a USB device, for example a printer or cable/DSL modem. Can I install the TU2-ET100(v3) on the device to make it "network ready"?

Unfortunately this is not possible. The TU2-Et100(v3) requires drivers to be installed for use. It is not possible to install drivers onto your USB device.
FAQ ID: 1480
Created: 1/30/2008
Modified: 3/18/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5