After I successfully configured the Access Point to meet my network settings, I cannot connecting to my network using wireless computers.

If you have a DHCP server in your network, you need to go into TCP/IP settings again and re-select "Obtain an IP automatically" for Windows 98/ME and "Obtain an IP Address automatically" for Windows 2000/XP to allow the PC to regain an IP address from your DHCP server.
FAQ ID: 144
Created: 2/2/2005
Modified: 2/2/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.4)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5