If my network's IP is different than the Access Point's range, what should I do?

You should still configure the access point first. After all the settings are applied, go to the Access Point's configuration page, click on TCP/IP settings and change an IP address for the Access Point to match your network's IP.
FAQ ID: 143
Created: 2/2/2005
Modified: 2/2/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.6)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5