How do I forward ports, create pin holes in the firewall or create Virtual Servers in my TEW-632BRP?

For Well Known Ports
  1. Log into the Router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin).
  2. Click on “Cancel” if the Setup Wizard comes up.
  3. Click on “Access” on the left hand side.
  4. Click on “Virtual Server”.
  5. Highlight the Service under the Name section.
  6. Select Enable.
  7. Type the IP address of computer that you want the port forwarded to in the LAN Server field.
  8. Click “Update”.
For Custom Ports
  1. Log into the TEW-632BRP by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username and password are both “admin”.
  2. Click on “Accesss” on the left hand side then click on “Virtual Server”.
  3. Select “Enable”.
  4. Enter a name for the virtual server.
  5. Choose the protocol (e.g. TCP, UDP or * (TCP and UDP)).
  6. Enter in the private and public port. Public and Private Port should be the same.
  7. Enter in the IP address of the PC you want to forward the ports to in the LAN Server field.
  8. Click “Add”
FAQ ID: 1418
Created: 11/22/2007
Modified: 1/19/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(4.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5