How do I forward ports in my TW100-S4W1CA?

Step 1 Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, click LOGIN then click on Advanced Setup.

Step 2 Next, click on NAT then Virtual Server.

1. Input the port for the application that you are going to be using in Mapping Ports.

2. Put the IP address of the computer that will be hosting that application in the Server IP.

3.Put a check mark in the Enable box and click Apply. Note: This opens both TCP and UDP ports.

 

FAQ ID: 1099
Created: 4/13/2006
Modified: 4/13/2006
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(3.7)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5