How do I configure the TW100-BRF114U?

Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel.

1. Double-Click on the Network Connection icon.

2. Right-Click on the Local Area Connection icon then click on Properties.

3. Highlight the Internet Protocol (TCP/IP) by single clicking on it then click on Properties.

4. Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK.

5. Click OK again.

6. Your computer is now ready to access and configure the TW100-BRF114U.

7. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.



FAQ ID: 1084
Created: 4/11/2006
Modified: 4/11/2006
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5