How do I forward ports in my TW100-BRF114?

Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.

  1. Put a check mark in the Enable box. Rename the service, select the PC that you want the port forwarded too, select TCP, UDP or both TPC/UDP for the protocol, then input the port (if itís a single port, enter the port in both boxís and the port range in the Internal LAN Ports or input the port if in a range), input the port needed on the External WAN Port (this port is usually the same port as the LAN port), then click Add as new Server.

FAQ ID: 1076
Created: 4/11/2006
Modified: 4/11/2006
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5