Why is my parallel printer, printing a lot of garbage characters?

Make sure that you have the latest print drivers for you printer.

You can also try changing the port speed to low from with in the PS-Admin Utility to Low.

Step 1 Click on Server Device.

Step 2 Click on the port that you have your printer plugged into.

Step 3 Change the Speed using the drop down menu.

 

FAQ ID: 1066
Created: 4/11/2006
Modified: 4/11/2006
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5