Login to My Account   Partners  
Click to change countryUnited States (change)
 
PoE Dome Network Camera
TV-IP252P (Version B1.xR)   
  • Tamper resistant interior wall and ceiling mount applications
  • Pan and tilt adjustable fixed position camera
  • No need to install this camera near a power source, power and data are received through a single Ethernet cable
  • Program motion detection recording, email alerts and more with complimentary software
SecurView IP Camera Critical Firmware Update Available

DISCONTINUED PRODUCT
The TV-IP252P (Version B1.xR) has been discontinued.  It has been replaced by the TV-IP252P (Version B1.2R). For a list of discontinued products, click here.
  • Camera
  • General
  • Sensor: 1/4” low lux CMOS sensor Resolution: 640 x 480 pixels Focal length: 4mm F/No: F2.0 (Board Lens) Minimum illumination: 0.1 Lux @ F2.0 View angle:
    • Horizontal: 51°
    • Vertical: 45°
    • Diagonal: 64°
  • Audio
  • External mic/audio in (sold separately) External speaker/audio out; mono (sold separately) Audio codec: PCM/AMR
  • Image & Video
  • Compression: MPEG-4/MJPEG dual streaming, 3GPP Resolution: VGA (640x480), QVGA (320x240), QQVGA (160x120) up to 30fps Mirror image: vertical/horizontal
  • Frequency
  • /A: NTSC/60Hz /EU: PAL/50Hz
  • Manual Pan/Tilt/Rotate
  • Pan: +175 ~ -175 Tilt: +80 ~ -80 Rotate: +90 ~ -90
  • GPIO
  • 2 input and 1 output
  • TV-out
  • BNC connector/ 1 Vp-p/ 75 Ohms
  • Hardware
  • Network
  • IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX IEEE 802.3af PoE
  • LED
  • Power, link/act
  • Reset Button
  • Reset settings
  • Power Consumption
  • 8 watts (max)
  • Power
  • 12V DC, 1.5A external power adapter
  • Dimension
  • 140 x 120 x 140mm (5.51 x 4.72 x 5.51in.)
  • Weight
  • Camera: 600g (21.2oz.)
  • Temperature
  • Operating: 0°C ~ 45°C (32°F ~ 113°F) Storage: -15°C ~ 60°C (14°F ~ 140°F)
  • Certifications
  • CE, FCC
  • Requirements
  • To View
  • Internet Explorer 6.0 or above
  • To Run Software
  • Windows 2000, XP, Vista, Windows 7
  • SecurView™ Software
  • Channel: supports up to 16 cameras Record/playback/motion detection/audio
  • Network Protocols
  • TCP/IP, UDP, ICMP DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client HTTP Server Samba Client PPPoE UPnP, Bonjour RTP (Real Time Protocol) RTSP (Real Time Streaming Protocol) RTCP (Real Time Control Protocol)
  • Settings
  • Image
  • Brightness, saturation, sharpness, mirror (horizontal/vertical)
  • Recording
  • Recording type: event based (motion detection and digital input trigger), continuous and scheduled Storage size: 32MB (minimum)
  • Snapshot
  • Trigger event: motion detection Action: send alert email and/or upload to FTP
  • Port Settings
  • HTTP port: 80 (default) RTSP port: 554 (default)
  • Digital Zoom
  • 3x
  • Dynamic DNS
  • Yes
  • Time
  • Synchronize with NTP server or set time/date manually
  •  

    Package Contents

    • TV-IP252P
    • Multi-Language Quick Installation Guide
    • CD-ROM (Utility & User’s Guide)
    • Cat.5 Ethernet cable (1.8m  /  5.9ft.)/li>
    • GPIO adapter
    • Power adapter (12V DC, 1.5A)