Login to My Account   Partners  
Click to change countryUnited States (change)

Power over Ethernet Splitter

TPE-102S (Version v2.0R)   
  • Splits power and data from a single Ethernet cable into two separate sources
  • Use this with a TRENDnet PoE switch to power and network a non Power over Ethernet device
  • Save on installation and equipment costs

The TPE-102S (Version v2.0R) has been discontinued.  For a list of discontinued products, click here.
StandardIEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
Network Media
  • 10Mbps: UTP/STP Cat. 3, 4, 5; Up to 100 Meters
  • 100Mbps: UTP/STP Cat. 5; Up to 100 Meters
  • Protocol CSMA/CD

    1 x PoE-IN Port (Data + Power):
    data pin: 1,2,3,6 power in: 4,5(V+), 7,8(V-) and 1,2(V+),3,6(V-)
    1 x Data-OUT Port (Data) Pin 1,2,3,6

    SwitchAdjustable Switch between 5V,7.5V, 9V and 12V
  • Power In: 48VDC 0.3A
  • Power Out: 5V(2A), 7.5V(1.33A), 9V(1.11A), 12V(0.86A)
  • Power Consumption10 Watts
    Jumper CablePlug Dimension: 5.5 x 2.0mm and 5.5 x 2.5mm
    Diagnostic LEDs
  • Power: Green
  • Temperature
  • Operation: 0C~45C (32F~ 113F)
  • Storage:-40C~70C (-40F~158 F)
  • Humidity10%- 90% (non-condensing)
    Dimensions 80 x 54 x 24mm(3.2 x 2.13.35 x 0.9 in.)
    Weight120g (4.23oz.)
    CertificationFCC, CE

    • TPE-102S
    • Multi-Language Users Guide
    • Power Jumper Cable
    • Cat.5 Cable (60cm/23.6inches)