<< Warning! >> Firmware upgrade failure may permanently damage the
unit and causing it not to function. If the issues in the "Release Notes" do
not address the problem you are experiencing with the Router, please do not
upgrade the firmware.
Do not perform the upgrade if the Router’s firmware is newer than the one that
you downloaded from our web site.
DO NOT interrupt the upgrade process. During the upgrade process, DO NOT operate
the web browser, DO NOT power off the Router, DO NOT disconnect the network
cable, and DO NOT press Router's reset button.
Step 1 Log into the TEW-632BRP by entering its IP address into a browser.
The default IP address is http://192.168.10.1.
The default username and password are both “admin”.
Step 2 Click “Tools” on the left hand side then click on “Firmware”.
Step 3 Click on “Browse” next to the box under the Firmware Upgrade section.
Locate and select the firmware file then click “Upload”.
United States [
(2.0)
