United States  [change]    
Support
Technical Support
KnowledgeBase
Download Drivers
Product Warranty Policy



KB Questions
How do I configure the TEW-690AP to repeat a wireless signal from my existing access point?
How do I create a WDS link between two TEW-690AP access points?
How do I reset the TEW-690AP to default settings?
How do I secure my wireless network?
What is the default username and password of the TEW-690AP?
What is the default IP address of the TEW-690AP?
Knowledge Base
Search:
Browse:
  Enter KB ID#:
Knowledgebase Home Page > Wireless > TEW-690AP

Browse "TEW-690AP" Questions
There were 6 questions found for TEW-690AP:

 
Question ID Question
2249   How do I configure the TEW-690AP to repeat a wireless signal from my existing access point?
Login to the TEW-690AP by entering http://192.168.10.100 into the address line of your browser. If ...
2248   How do I create a WDS link between two TEW-690AP access points?
Ensure that each TEW-690AP is configured for DHCP or has been assigned unique IP addresses to preven...
2247   How do I reset the TEW-690AP to default settings?
Press and hold in the reset button on the bottom of the TEW-690AP for approximately 15 seconds while...
2246   How do I secure my wireless network?
When going through the setup wizard you are prompted to setup wireless security. Use WPA2 AES encry...
2245   What is the default username and password of the TEW-690AP?
The default username and password are both admin.
2244   What is the default IP address of the TEW-690AP?
The default IP address is 192.168.10.100.
Home | Company | Products | Where to Buy | News & Info | Support | Downloads | Partners | Store | TRENDnetTV
© Copyright 2013 TRENDnet. All Rights Reserved. Contact Us | Privacy Policy   Connect: Facebook Twitter You Tube
Share