How do I reset the TEW-738APBO to factory default settings?
Press and hold in the reset button for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: admin Password: admin SSID: TRENDnet7380_2.4GHz Encryption: none ...
 
How do I log in to the TEW-738APBO and configure it?
Log in to the TEW-738APBO by entering http://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  ...
 
How do I setup a WDS link between 2 TEW-738APBOs?
Log in to the TEW-738APBO by entering http://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  Click System > Operation Mode and make sure that Operation Mode is set to WDS Mode then click Save & Reboot. Click Wi...
 
How do I secure my wireless network?
Log in to the TEW-738APBO by entering http://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  Click on Wireless > Virtual AP and click VAP Edit on your profile. Click the Security Type drop down menu and select...
 
Does the TEW-738APBO support SNMP technology?
Yes, the TEW-738APBO supports SNMP v1, v2c and v3. Also supports SNMP Trap.
 
Whats the maximum amount of entries for the MAC address filter?
The TEW-738APBO supports up to 20 entries.
 
Can I use an 802.3af PoE injector to power the TEW-738APBO?
The TEW-738APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-738APBO. ...