When I connect to my wireless router my connection is at 150 ~ 300Mbps. Why do I only connect to the TEW-713RE at 75Mbps?
The TEW-713RE is an N150 device with only 1 antenna to transmit and receive wireless signals simultaneously. Your router may employ more antennas to transmit and receive signals and provides a higher connection and throughput speed....
 
Why is my computer still connected to my wireless router instead of the TEW-713RE that has a stronger signal?
When you start your computer it will look at your saved or preferred networks and connect to the one with the strongest signal. It will not switch to another access point or wireless router until the signal is too weak to connect. When this happens, it will look at your saved or preferred networks...
 
What is the proper placement of the TEW-713RE to extend my wireless network?
The TEW-713RE extends a wireless network by repeating the wireless signal from your existing wireless network. It is not an antenna booster. Do not place it near your current wireless router or access point. After configuration, the unit should be placed where your current wireless signal starts...
 
What is the default IP address for the TEW-713RE?
The default IP address for the TEW-713RE is 192.168.10.100. During the initial configuration you can also login to the TEW-736RE by typing “tew-736re.trendnet” in the address bar of your browser window....
 
What is the default username and password for the TEW-713RE?
The default username and password are both admin.
 
How do I reset the TEW-713RE to default settings?
Press and hold the reset button located on the bottom of the TEW-713RE for 15 seconds to reset it to default values. The default values are as follows: IP Address: 192.168.10.100 Username: admin Password: admin ...
 
How do I configure the TEW-713RE if my router does not support WPS or I do not use WPS?
Plug in the TEW-713RE to a power outlet. Connect a network cable from the TEW‐713RE to your laptop/PC Open a web browser and type http://tew-713re or http://192.168.10.100 Enter the Login information. By default the username and password is admin Click on Wireless ...
 
What should I do if I cannot connect the TEW-713RE to my existing wireless network?
Your existing wireless router or access point defines all your wireless settings, security measures and management features. Please ensure you have taken these features into account as they can limit access to your network. Please also ensure you have placed the TEW-713RE within range of the wirel...