I have gone through the Setup Wizard but still am not able to go online. What should I check?
Please verify all settings with your ISP. You will need the correct VPI and VCI values. Please also verify if they require the use of a Service Name. Check to see if the require a specific MTU value as well. When you have gathered this information do the following to apply them to the TEW-718BRM...
 
How do I connect my wireless devices using the WPS button?
Push and hold the WPS button located on the back of your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. Push the WPS button on the wireless device you are connecting. ...
 
When I attempt to connect to the router I am prompted for PIN. Where is this located?
Log in to the TEW-718BRM by entering http://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. Click Setup>Wireless Settings>WPS Setup The AP PIN will be the pin numb...
 
How do I reset the TEW-718BRM to factory default settings?
Press and hold in the recessed reset button on the back of the Router for approximately 10 seconds while the power is on to reset the unit. The default login values are as follows. IP Address: 192.168.10.1 Username: admin Password: admin...
 
How do I forward ports in the TEW-718BRM?
Log in to the TEW-718BRM by entering http://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default username and password are both admin. After you have logged in to the TEW-718RM click on the Advanced > NAT page>Virtual Server and cr...
 
What is the default username and password on the router?
The default username and password for the TEW-718BRM are both admin.
 
How do I login to the router?
Log in to the TEW-718BRM by entering http://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. ...
 
How do I setup and secure my wireless network?
Log in to the TEW-718BRM by entering http://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. Click on Setup, and click on Wireless Settings. Here you can setup your ...