How do I rest the TEW-715APO to factory default settings?
Press and hold in the reset button for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: admin Password: admin SSID: TRENDnet715 Encryption: none ...
 
Question: How do I log in to the TEW-715APO and configure it?
Log in to the TEW-715APO by entering http://192.168.10.1 into the address line of your browser. The default Username and Password are both admin ...
 
How do I setup a WDS link between 2 TEW-715APO’s?
Log in to the first TEW-715APO by entering http://192.168.10.100 into the address line of your browser. The default Username and Password are both admin. Click Wireless>Basic Settings and make sure that Operation Mode is set to Bridge then click Apply. Click Wireless>Profile Setting an...
 
How do I secure my wireless network?
Log in to the TEW-715APO by entering http://192.168.10.1 into the address line of your browser. The default Username and Password are both admin. Click on Wireless>Profile Settings and click your profile. Select the highest form of security supported by your wireless computers and networ...
 
Do I need to purchase antennas with the TEW-715APO?
The TEW-715APO comes with a built-in dual polarization directional 8dBi antenna. The built-in antenna is ideal for point-to-point bridging applications. You can also add an Omni-directional antenna for a full 360 degrees of wireless coverage. Recommended for outdoor external antennas application...
 
Does the TEW-715APO support SNMP technology?
Yes, the TEW-715APO supports SNMP v2c and v3.
 
What’s the maximum amount of entries for the MAC address filter?
The TEW-715APO supports up to 32 entries.
 
Can I use an 802.3af PoE injector to power the TEW-715APO?
The TEW-715APO is not 802.3af compliant device. It uses proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-715APO. ...