How to setup the Internet Camera for Remote Viewing over the Internet
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addre...
 
What speakers can I use with this camera?
The speakers need to have an external power source with a 3.5mm jack.
 
How do I setup motion detected recording?
Motion detected recording is accomplished through the use of SecurView Pro. Please refer to page 17 of the SecurView Pro userís guide. It is included on the CD and available for download from our website here. TV-IP572P: http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=155...
 
How do I upgrade the firmware of my camera?
TV-IP572P: Download the firmware file from our website here. http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID= 1555 Included with the firmware update are step-by-step instructions on how to update the firmware. TV-IP572PI: Download the firmware file from our website here. ...
 
How do I reset my TV-IP572P or TV-IP572PI back to factory defaults?
Press and hold in the reset button on the side of the camera for 3 seconds to reset the camera to default values. Note: The reset button is recessed. Use a paperclip or similar object to reach the button. ...
 
What do the LED indicators on the front of the TV-572P and TV-IP572PI represent?
TV-IP572P Power: This LED indicator will be solid blue when the camera is powered on. Link: This LED indicator will blink orange when there is an active network connection. TV-IP572PI Power: This LED indicator will be solid blue when the camera is powered on. Link: This LED indica...