Direct Video Stream Authentication
By default, access to the camera requires authentication.  For security purposes, TRENDnet recommends that this feature remain enabled.   Please note that disabling this feature disables authentication prompts. RTSP access: The camera supports three levels of RTSP access.  ...
 
How do I pan and tilt the camera? Can it be done remotely via SecurView Pro or its web browser interface?
The camera is a fixed pan and tilt camera.† Physically pan and tilt the camera to the location you want to view.† The camera remains in this fixed position.† It is not remotely adjustable. Remove the dome cover by unscrewing the four screws. Adjust the lens assembly by performing the followin...
 
What speakers can I use with this camera?
The speakers need to have an external power source and a 3.5mm jack.
 
How do I setup motion detected recording?
Motion detected recording is accomplished through the use of SecurView Pro. Please refer to page 17 of the SecurView Pro userís guide. It is included on the CD and available for download from our website here. http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1561...
 
How do I upgrade the firmware of my camera?
Download the firmware file from our website here. http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1561 Included with the firmware update are step-by-step instructions on how to update the firmware....
 
What do the LED indicators in the TV-IP262P represent?
TV-IP262P Power: This LED indicator will be solid amber when the camera is powered on. Link: This LED indicator will blink green when there is an active network connection. Note: The LED lights are located inside the dome and are not visible without the dust cover removed. ...