How do I reset the TEW-676APBO to factory default settings?
Press and hold in the reset button for 10 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: root Password: root SSID: TRENDnet676 Encryption: none...
 
How do I log in to the TEW-676APBO and configure it?
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default Username and Password are both root. ...
 
How do I setup a WDS link between 2 TEW-676APBO’s?
Log in to the first TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default username and password are both root. Click Wizard > Wizard Setup then click Next. Select WDS then click Next. Each unit must be configured with a unique IP addres...
 
How do I secure my wireless network?
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default Username and Password are both root. Click on Wireless > Virtual AP Setup then click Edit next to the Primary AP. Select the highest form of security supported by your wireless client...
 
Do I need to purchase antennas with the TEW-676APBO?
The TEW-676APBO comes with an internal high powered 12dBi patch antenna.
 
Can I use an 802.3af PoE injector to power the TEW-676APBO?
The TEW-676APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-676APBO. ...
 
Does the TEW-676APBO support 2.4GHz wireless devices?
The TEW-676APBO is a 5GHz device only. It does not support 2.4GHz wireless clients.
 
How do I reset the TEW-676APBO to factory default settings?
Press and hold in the reset button for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: root Password: root SSID: TRENDnet676 Encryption: none ...