How do you schedule the TEW-692GR to allow Internet access for wired or wireless computers at specified time?
To be able to configure TEW-692GR’saccesscontrol feature allowing computers to access the Internetbased on a schedule profile. Applies to: TEW-692GR hardware version v1.0R or later Steps: Find the MAC address of the computer to be on the schedule profile On the computer’...
 
Can I setup my TEW-692GR without using Wifi Protected Setup?
Yes. Security on the TEW-692GR may also be configured using a web browser. Encryption can be set on both frequencies separately (2.4GHz & 5GHz) using separate WPA2 passwords. The screen shots below demonstrate the areas to configure a security password manually using the Internet Explorer br...
 
Can I put higher gain antennas on the TEW-692GR?
No. The TEW-692GR uses external fixed antennas that are not removable. Also, the product is based on dual band technology which only allows it to generate two separate wireless networks at the same time by using the internal antenna’s together with its external antenna’s. This prevent...
 
Can I isolate users from one another by using multiple SSIDs?
The TEW-692GR Dual-Band Wireless N450 Router has 4 available SSIDs (Wifi Network Name) for both the 2.4GHz and 5GHz frequency spectrums giving you a total of 8 available SSIDs.  The common belief is that each wireless network (SSID) is isolated from one another making clients on separate SSIDs i...
 
Can I use both 2.4GHz and 5GHz frequency bands simultaneously?
The TEW-692GR is a Dual-Band Wireless N450 Router, which can operate in both 2.4GHz and 5GHz frequency spectrums simultaneously.  Early dual band wireless N routers were unable to utilize both spectrums simultaneously and could only operate in either 2.4GHz or 5GHz modes.  This forced solution p...
 
Can I use my N300 wireless adapter with the TEW-692GR Wireless N450 Router?
The TEW-692GR is a Dual-Band Wireless N450 Router that can operate at a blazing fast 450Mbps, but what’s that mean if you have a N300 (300Mbps) wireless n adapter in your computer? Fortunately our dual band wireless N router is based on IEEE standards which require backward compatibility with previ...
 
My computer is asking for an 8-digit-PIN from the router when I try to establish a wireless connection. What does this mean and where do I find it?
The Windows 7 operating system offers you a built-in utility to configure and manage your wireless connections. The 8-digit-PIN request only appears when your wireless router’s wireless network settings have not been configured. We recommend that the initial configuration of your wireless router...
 
How do I connect to the TEW-692GR at 450Mbps?
To connect at 450Mbps your wireless clients must also support 450Mbps and the router’s channel bandwidth must be set to Auto 20/40MHz.   For wireless security you must use WPA2 AES for 802.11n support. Log in to the TEW-692GR by entering http://192.168.10.1 into the address line of your br...
 
How do I reset the router to factory default settings?
Press and hold in the reset button on the side of the router for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.1 Username: admin Password: admin SSID (2.4GHz): TRENDnet692_2.4GHz SSID (5GHz): TRENDnet692_5GHz En...
 
How do I forward ports?
Log in to the TEW-692GR by entering http://192.168.10.1 into the address line of your browser. The default username and password are both “admin”, without the quotes. Click Advanced on the left hand side and then click Virtual Server.  The following example shows how to forward TCP...
 
What is the default username and password on the router?
The default username and password are both “admin”, without the quotes
 
How do I log into the router and configure it?
Log in to the TEW-692GR by entering http://192.168.10.1 into the address line of your browser. The default username and password are both “admin”, without the quotes. Click “Login” ...
 
How do I setup my wireless network?
Log in to the TEW-692GR by entering http://192.168.10.1 into the address line of your browser. The default username and password are both “admin”, without the quotes. Click “OK” Click Wireless 2.4GHz and Wireless 5GHz and then Security.  You must secure both radios to secure the ne...
 
How do I secure my wireless network?
Log in to the TEW-692GR by entering http://192.168.10.1 into the address line of your browser. The default username and password are both “admin”, without the quotes. Click “OK” Click Wireless 2.4GHz and Wireless 5GHz and then Security.  You must secure both radios to secure the ne...