I receive an error when attempting to add a remote device stating that the password is incorrect. How do I resolve this?
Please ensure that the remote PowerLine adapter has an active Ethernet connection to properly synch the units and add the remote unit to the utility. ...
 
How many TPL-304E adapters can I use in a single network?
A maximum of 8 TPL-304E adapters can be networked.
 
What do the LED’s on the TPL-304E indicate?
Power Off – Power Off Solid Green – Power On Powerline Link/ACT LED Off – No powerline link Solid Green – Successful powerline link Blinking Green – Activity Ethernet Link/ACT LED Off – No Ethernet link Solid Green – Successful Ethernet link Blinking Green – Activity ...
 
How do I reset the TPL-304E?
Reset the TPL-304E by pressing and holding in the reset button for approximately 10 seconds. The default network ID is HomePlugAV. You can synchronize the power line devices again by pressing and holding the sync button for 3 seconds on each unit. ...
 
I’m not getting a connection through the TPL-304E. What should I do?
Ensure you do not have the TPL-304E units connected to surge protectors or to any outlet with appliances. Please also ensure the units are connected to outlets within the same circuit breaker box. Reset the units and ensure they are configured with the same Network ID or use the sync button to co...