Does the TE100-MP1UN provide a web management interface?
Yes the TE100-MP1UN provides a web management interface. From the web interface you can see the server status (Hardware ID, Firmware Version, MAC Address, etc.), printer status, and the ability to configure the print server IP and device name....
 
Is the TE100-MP1UN compatible with my wireless network?
The TE100-MP1UN is not a wireless device. However, if the print server is connected to a network that has a wireless router/access point, your wireless computers can communicate with the TE100-MP1UN. If the network is wired, a wireless laptop/computer will not have access to the network and the pr...
 
Is the TE100-MP1UN compatible with my Mac computer?
No. The TE100-MP1UN is only compatible with computers running a Windows operating system.
 
How do I find the print servers IP Address if it is set to DHCP?
Option 1 is to log into your router and determine the IP Address that was assigned to the print server. Option 2 is to insert the Utility CD provided with the TE100-MP1UN into the CD-ROM drive and follow the Setup Wizard. Be sure to write down the IP Address given at the end of the wizard for futu...
 
How do I gain access to the printer if someone else is printing?
If someone else is printing they will automatically connect to the print server and then be immediately disconnected when the printing is finished so that others could print. If someone is using the printer to fax or scan the user will need to manually connect to the print server and they will be t...
 
What printers are compatible with the TE100-MP1UN?
The TE100-MP1UN is compatible with GDI, host-based, or multi-function printers. We do not have a compatibility list available at this time. In most cases, TE100-MP1UN will support your printer. TE100-MP1UN utilizes a technology called network USB, it will capture any USB printer connected to the TE1...
 
Does the N in TE100-MP1UN mean that it is part of the 802.11n technology?
The N does not represent that it part of the 802.11n technology. The TE100-MP1UN is not a wireless print server. The N indicates that it is a new print server, which replaces the TE100-MP1U. ...
 
What is the benefit of the multi-function print server to that of a standard print server?
Standard print servers are not compatible with GDI, host-based, or multi-function printers. The TE100-MP1UN (multi-function print server) is compatible with most printers since it does support printers that are GDI, Host-Based, or Multi-Function. In addition, the 2-port USB print servers (TE100-MP2...
 
Can I connect any other peripherals other than a printer to the TE100-MP1UN?
The USB connection on the TE100-MP1UN is only compatible with USB printers. It will not support any other USB devices. If you require an extra USB port that is also compatible with USB-based external storage devices, TE100-MP2U is recommended....
 
Which operating systems are supported?
The TE100-MP1UN is compatible with Windows 2000 (32-bit), XP (32-Bit), 2003 Server (32-bit) and Vista (32-Bit)....
 
What is the TE100-MP1UN installation process?
Install the print drivers onto the computer that you want to print to it. Insert the Utility CD Run the Setup Wizard Follow Setup Wizard instructions for USB connections, power, and Ethernet connections After all cables and LEDs are working properly click on the print server Co...
 
Do I need to install the TE100-MP1UN Utility software on every computer in the network?
The TE100-MP1UN Utility will need to be installed on every computer that will be printing to the printer connected to the TE100-MP1UN. The printer driver will also need to be installed on every computer that will be printing to that printer....
 
Can I connect an external USB hard drive to the TE100-MP1UN and use it as a network attached storage device?
No. The TE100-MP1UN is strictly for sharing a USB printer on your network. It cannot share an external storage device within the network for all to access. You can however go with the TE100-MP2U which does support NAS devices....
 
Can I attach a USB hub to the TE100-MP1UN to add more devices?
No. The TE100-MP1UN cannot connect to a hub to add more ports; it will not recognize the device. Only 1 USB printer is supported. If you have 2 USB printers you want to share on the network, we recommend the TE100-MP2U....