How do I forward ports in my TWG-BRF114?
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.  Put a check mark in the Enable box. Rename the ser...
 
Where can I find the MAC Address of my TWG-BRF114?
The MAC Address can be found on a label on the bottom of the router.  You can alternately find it by doing the following: Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) a...
 
How do I configure the TWG-BRF114?
Click Start then click on the Control Panel.  For Windows 2000 click on Start, highlight settings then click on the Control Panel. Double-Click on the Network Connection icon. Right-Click on the Local Area Connection icon then click on Properties.  Highlight the Internet Prot...
 
How do I change the IP Address of my TWG-BRF114?
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).  NOTE: If the Setup Wizard starts, click on Cancel. Click on LAN on the left hand side. Change t...
 
What is the default username and password for the TWG-BRF114?
The default username & password for the TWG-BRF114 are both (blank). There is no username and password set by default....
 
What is the default IP address of my TWG-BRF114?
The default IP address for the TW100-BRF114U is 192.168.0.1.
 
What can I do if I forgot my password or want to reset back to factory defaults?
Locate the reset button on the back of the TWG-BRF114. Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...
 
How do I change the username & password on my TWG-BRF114?
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on Password on the left hand side. En...
 
How do I configure the TWG-BRF114 for a Cable connection using a Dynamic IP Address?
Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address.  Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (bl...
 
How do I configure the TWG-BRF114 for a DSL, PPPoE connection?
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on WAN Port on the left hand side. Choose P...