How do I reset the router to factory default settings?
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.1 Username: admin Password: Leave blank SSID: TRENDnet672 Encryption: none ...
 
How do I forward ports?
Login to the TEW-672GR by entering http://192.168.10.1 into the address line of your browser. The default User Name is “admin”, without the quotes. There is no password by default. Click “Login” Click Advanced on the left hand side and then click Virtual Server. The example shown ...
 
What is the default username and password on the router?
The default username is “admin”, without the quotes. There is no password by default.
 
How do I log into the router and configure it?
Login to the TEW-672GR by entering http://192.168.10.1 into the address line of your browser. The default User Name is “admin”, without the quotes. There is no password by default. Click “Login” ...
 
How do I setup my wireless network?
Login to the TEW-672GR by entering http://192.168.10.1 into the address line of your browser. The default User Name is “admin”, without the quotes. There is no password by default. Click “OK” Click Wireless and then Basic. You can define the wireless network parameters here. ...
 
How do I secure my wireless network?
Login to the TEW-672GR by entering http://192.168.10.1 into the address line of your browser. The default User Name is “admin”, without the quotes. There is no password by default. Click “OK” Click on Wireless and then Security. Select the highest form of security supported by your...
 
When using WDS links, am I still able to use 802.11n mode?
Yes, the TEW-672GR will maintain 802.11n mode with WDS links.
 
What is Dual Band wireless?
In dual-band wireless devices, in which wireless Routers/Access Point and Adapters are compatible with both 2.4GHz and 5GHz frequencies in one device....
 
Can I connect both 802.11a and 802.11n wireless clients to the TEW-672GR at the same time?
The TEW-672GR will only support one frequency at a time. You must select a wireless mode to be used, select wireless a or wireless n. ...
 
How many wireless radios are built in to the TEW-672GR?
The TEW-672GR has two built in wireless radios for each of the two frequencies the Router supports (802.11a –5GHz and 802.11b/g/n –2.4GHz)....
 
How do I configure wireless a and wireless b/g/n of the TEW-672GR?
To configure the TEW-672GR for either 802.11a or 802.11b/g/n, simply access the setup page of the TEW-672GR and look for the Wireless button on the left side. Look for Wireless mode and select the mode you want your TEW-672GR to operate in. Apply the setting at the bottom of the window. ...
 
When searching for a wireless network, how do I know if it’s a wireless a or wireless b/g/n WLAN?
Depending on the type of wireless adapter you are using, you should see the wireless network that your adapter will support. If the wireless adapter is an 802.11 b/g/n, you will see all 2.4GHz wireless networks (802.11 b/g/n). If your wireless adapter is an 802.11a, then you will see all 5GHz wirele...
 
I already have a wireless 802.11a network adapter; can I use it with the TEW-672GR?
Yes, the TEW-672GR is fully compatible with existing 802.11a wireless devices.
 
Can I use the TEW-672GR with other manufactures dual band wireless devices?
Yes, as long as the 3rd party manufactures dual band wireless adapters support 802.11a/b/g/n, it should work without any issue. (Note: Please refer to 3rd party manufacture for correct setup of any non-TRENDnet wireless device(s))....
 
What type of wireless security does the TEW-672GR support?
The TEW-672GR supports the following security for wireless network, WEP, WPA/WPA2, WPA/WPA2 Enterprise, Wireless MAC filtering, and WiFi Protected Setup (WPS)....
 
Does the TEW-672GR have the ability to use multiple SSIDs from one single wireless Router?
Yes, the TEW-672GR allows you to create up to three additional virtual SSIDs (Wireless Network Name) to connect with. Multiple Service Set Identifiers (SSID) allow the ability to create virtual wireless networks while only using one wireless Router/Access Point device as the main connecting poin...
 
What if I need to extend my wireless network, does the TEW-672GR support WDS?
Yes, the TEW-672GR is fully compatible with WDS; you can add additional Access Point(s) to extend your coverage of your wireless network. This feature works with the TEW-637AP. (Note: WDS only supports wireless g speed. The use of multiple Access Points will reduces the overall network throughput to...
 
What is DHCP Reservation and how do I set it up on the TEW-672GR?
DHCP Reservation is used to assign a fixed IP Address to a device that always requires the same IP Address every time it is in use. This feature can be used for a print server, IP Camera, Network storage device as well as a computer. To setup DHCP Reservation, click on the Network button and select ...
 
There is an option in the wireless mode to select a frequency for different channels but in the a/n mixed mode you can only choose auto-select, why can’t I select my own channel?
This unique wireless mode allows both 2.4GHz and 5GHz to operate as one special channel range. This feature will automatically select the best channel to use in your wireless environment....
 
Do I get faster Internet access if I use wireless a over using wireless n?
No, the Internet side of the TEW-672GR works independently from the wireless side the Router. Your Internet Service Provider controls your Internet speed. ...
 
There are several different wireless modes in the TEW-672GR, how can I tell which mode is right for my network?
802.11b/g mixed mode (2.4GHz) - This wireless mode works in the 2.4GHz frequency range and will allow both wireless b (11Mbps) and wireless g (54Mbps) clients to connect and access the TEW-672GR and share access at the same time. Although the wireless b/g operates in the 2.4GHz frequency, this ...
 
I am not getting that many bars on my wireless signal, what can I do to improve the wireless signal?
When using the TEW-672GR from time to time you may experience issues with wireless signal loss or no signal, this is due to environmental conditions in and out of any structure or objects in the way. Since wireless is based on line of sight. The wireless signals do not pass through objects, walls or...
 
I have a wireless n adapter and I am using the TEW-672GR, can I still connect and access the Router if I set the wireless mode to wireless a/n mixed mode?
No, only wireless dual band or wireless 802.11a adapters will be able to see the wireless network that is operating in the wireless a/n mode. Even with the mode being mixed both wireless a and wireless n, the mode actually still works in the 5GHz frequency range. This frequency will exclude any 2.4G...
 
The TEW-672GR came with a CD-ROM, is there any software utility I need to install on my computer to allow the Router to work?
No, no software or utility is required to allow this product to work. The TEW-672GR is completely ready to use out of the box (Note: please refer to Quick Installation Guide that is included with this product)....
 
How many wireless devices can you connect to the TEW-672GR?
The TEW-672GR can support up to 32 wireless client connections per one Router/ Access Point.