I am unable to connect to MSN Messenger and browse to MSN.com. However, I can access all other web sites.
Step 1 The TEW-432BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username is admin with a password of admin. They are case sensitive. Step...
 
I got an error when running the EasyGo setup. What can I do?
The EasyGo setup will only work on a Windows PC.  If you want to setup the router from a non-Windows PC, follow the steps below. Step 1 Connect an Ethernet cable from your modem to the WAN port on the router. Step 2 Connect a second Ethernet cable from your computer to one of the 4 LAN por...
 
How do I improve my wireless signal?
Step 1 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pass...
 
How do I use my router as an Access Point only?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username is admin with a password of admin. Step 2 Click on “Main” on the left hand side then click on “LAN&DHCP Server”. Step 3 Click on “Disable” on the “...
 
Why doesn’t it save or make changes when I click “Apply” for WEP or changing the Time?
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. You can also clear the cache in your browser to ensure you are not looking at a cached image of the web page....
 
How do I connect the TEW-432BRP using a DSL Connection?
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connection from the mod...
 
How do I forward ports in my router?
For Well Known Ports Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin). Click on “Cancel” if the Setup Wizard comes up. Click on “Access” on the left hand si...
 
Where can I find the MAC address of my router?
Step 1 Log into the router by entering it’s IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin). Step 2 Click “Status” on the left hand side then click on “Device Information”. ...
 
How do I secure my wireless network?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin). Step 2 Click on “Wireless” on the left hand side then click on “Security” below wireless. Next select “Security” fro...
 
How do I configure the router through the web-based configuration?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin)....
 
How do I change the IP address of my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (admin). Step 2 Click on “Main” on the left hand side then click on “LAN&DHCP Server”. Step 3 Enter in the new va...
 
What is the default IP address of my router?
The default IP address is http://192.168.10.1. The default username is (admin) and the default password is (admin)....
 
How do I upgrade the firmware on my router?
> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do not address the problem you are experiencing with the router, please do not upgrade the firmware. Do not perform the upgrade if the router’s firmware is newer than th...
 
How do I save or reload the configuration of my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username is admin with a password of admin. Step 2 Click “Tools” on the left hand side then click on “Settings”. ...
 
What can I do if I forgot my password or want to reset back to factory defaults.
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on....
 
How do I change the password on my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username is admin with a password of admin. Step 2 Click on “Main” on the left hand side then click on “Password”. ...