When using WDS links, am I still able to use 802.11n mode?
When using WDS links the TEW-631BRP will fall back to 802.11g mode.
 
Why doesn’t it save or make changes when I click “Apply” for WEP or changing the Time?
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. ...
 
How do I connect the TEW-631BRP using a DSL Connection?
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-631BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connecti...
 
How do I forward ports in my router?
Well Known Ports 1) Log into the router by entering its IP address into a browser. The default IP address is http://192.168.10.1. At the login, enter your username (admin) and password (blank). 2)Click on “Advanced” on the left hand side then click on “Virtual Server”. 3)Click...
 
Where can I find the MAC address of my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). Step 2 Click “Status” on the left hand side then click on “Device Information”....
 
How do I enable encryption on my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). Step 2 Click on “Basic” on the left hand side then click on “Wireless”. Step 3 Ente...
 
How do I configure the router through the web-based
configuration?

Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). ...
 
How do I change the IP address of my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). Step 2 Click “Basic” on the left hand side then click on “Network Settings”. Step 3...
 
What is the default IP address of my router?
The default IP address is http://192.168.1.1. The default username is (admin) and the default password is (admin). ...
 
How do I upgrade the firmware on my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). Step 2 Click “Tools” on the left hand side then click on “Firmware”. Step 3 Click o...
 
How do I save or reload the configuration of my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. At the login, enter your username (admin) and password (blank). Step 2 Click “Tools” on the left hand side then click on “System”. ...
 
What can I do if I forgot my password or want to reset back to factory defaults?
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on. ...
 
How do I change the password on my router?
Step 1 Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. The default username is “admin” with a password of (blank). Step 2 Click “Tools” on the left hand side then click on “Admin”. Step 3 Input the new password and verify. Then...