TRENDnet's 10 dBi Outdoor PoE Access Point, model TEW-738APBO, provides Wireless N300 building-to-building connectivity. A variety of installation scenarios are facilitated with Access Point (AP), Wireless Distribution System (WDS), Repeater, and CPE + AP modes. The rugged aluminum IP67 rated housing comes with wall and pole mounting hardware.
| Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1X
- IEEE 802.11d
- IEEE 802.11e
- IEEE 802.11f
- IEEE 802.11h
- IEEE 802.11i
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (2.4GHz up to 300 Mbps)
|
| Hardware Interface | - 1 x 10/100 Mbps (proprietary PoE) port**
- Reset button
- LED indicators
|
| Special Features | - IP67 weather rated
- 802.1Q VLAN assignment per SSID
- DDNS support for dyn.com, dhs.org, osd, tzo.com
- Schedule radio on/off time policy
|
| Access Control | - Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
- Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
- Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
- 802.1Q VLAN
|
| QoS | - WMM
- Diffserv (DSCP)/ToS
- 802.1p/CoS
|
| Operation Modes | - Access Point (AP)/WDS+AP
- Wireless Distribution System (WDS)
- Repeater
- CPE + AP (WISP)
|
| SSID | |
| Internet Connection Types (CPE mode) | - Dynamic IP (DHCP)
- Static IP (Fixed)
- PPPoE (Dynamic IP/Static IP)
- PPTP (Dynamic IP/Static IP)
|
| Management/Monitoring | - Local/remote web based management (HTTP, HTTPS)
- Local/remote CLI based management (Telnet, SSH)
- SNMP v1/v2c/v3
- SNMP Trap
- MIB II
- Upgrade firmware
- Backup/restore configuration
- Event logging
- Reboot
- Restore to factory defaults
- Ping test
- Ping Watchdog
|
| Routing | - Static
- Dynamic (RIP v1/2, OSPF)
|
| Frequency | - FCC: 2.412 - 2.462 GHz
- ETSI: 2.412 – 2.472 GHz
|
| Wireless Channels | |
| Modulation | - 802.11b: DBPK, DQPSK, CCK with DSSS
- 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
|
| Media Access Protocol | |
| Antenna Gain | - 10 dBi internal sector antenna
|
| Wireless Output Power/Receiving Sensitivity | - 802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.6 dBm (max.)/-88 dBm (typical) @ 11 Mbps
- 802.11g: FCC/ETSI: FCC: 27 dBm (max.), ETSI: 10.7 dBm (max.)/- 74 dBm (typical) @ 54 Mbps
- 802.11n: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.7 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
|
| EIRP | - FCC: up to 38 dBm (with built in 10 dBi antenna)
- ETSI: up to 20 dBm (with built in 10 dBi antenna)
|
| Power | - Input: 100 – 220 V, 50 - 60 Hz, 0.6 A
- Output: 48 V, 0.5 A
- Consumption: 22 Watts max.
|
| Operating Temperature | - -30 - 60° C (-22 - 140° F)
|
| Operating Humidity | |
| Certifications | |
| Dimensions | - 215 x 122 x 66 mm (8.5 x 4.8 x 2.6 in.) (not including mounting bracket)
|
| Weight | |
| Warranty | |
| PACKAGE CONTENTS |
- TEW-738APBO
- CD-ROM (User's Guide)
- Multi-Language Quick Installation Guide
- Mounting hardware
- Proprietary PoE injector
- Water-proof RJ-45 plug (Network cable not included)
- Power adapter (48V, 0.5A)
|
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
** Recommended max. PoE cable length of 70 m.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
