10-Port Gigabit Web Smart PoE+ Switch
TPE-1020WS (Version v1.1R)
  • 8 x PoE+ Gigabit ports
  • 2 x Gigabit Ethernet ports and 2 x shared SFP slots
  • Up to 30 Watts per port with a 75 Watts total power budget
  • 20 Gbps switching capacity
  • Rack mountable

TRENDnet’s 10-Port Gigabit Web Smart PoE+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight PoE+ Gigabit ports and two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv6 ready switch offers advanced traffic management, troubleshooting, access management controls, energy saving GREENnet, and monitoring features at a reduced cost.


Hardware Design
Fanless rack mountable housing features eight Gigabit PoE+ ports (automatically supplies PoE+ (30 Watts) and PoE (15 Watts)) and two Gigabit Ethernet uplink ports shared with two SFP slots
IPv6 Ready
This switch supports IPv6 configuration and neighbor IPv6 network support
Traffic Management
A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (CoS), and QoS queue scheduling
Troubleshooting
Real time traffic comparison charts, error group charts, and a convenient cable diagnostic test aides in rapid troubleshooting
Encryption
Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered access controls
Monitoring
RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions
Energy Savings
Up to 70% energy saving GREENnet technology
  • Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3af
  • IEEE 802.3at
  • IEEE 802.3az
  • Device Interface
  • 8 x Gigabit PoE+ ports (ports 1-8)
  • 2 x Gigabit Ethernet ports (ports 9-10)
  • 2 x Shared SFP slots (shared with ports 9-10)
  • LED indicators
  • Data Transfer Rate
  • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
  • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
  • Gigabit Ethernet: 2000 Mbps (full duplex)
  • Performance
  • Switch fabric: 20 Gbps
  • Ram buffer: 8 Mbits
  • MAC Address Table: 16K entries
  • Jumbo Frames: 10 Kbytes
  • HOL Blocking Prevention
  • Forwarding rates: 14.88 Mppst
  • Management
  • HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
  • SNMP v1, v2c, v3
  • RMON v1
  • Static Unicast MAC Address
  • Enable/disable 802.3az Power Saving
  • LLDP
  • Virtual Cable Test
  • IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
  • MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • Bridge MIB Extension RFC 2674
  • SNMPv2 MIB RFC 1907
  • Ethernet Interface MIB RFC 1643
  • Ethernet –like MIB RFC 2863
  • Interface Group MIB RFC2233
  • MIB Traps Convention RFC 1215
  • RMON MIB RFC 1757, RFC 2819
  • 802.1p MIB RFC 2674
  • RADIUS Client Authentication MIB RFC 2618
  • LLDP-MIB IEEE 802.1ab
  • Ping MIB RFC 2925, RFC 4560
  • Spanning Tree
  • IEEE 802.1D STP (Spanning Tree protocol)
  • IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
  • Link Aggregation
  • Static Link Aggregation
  • 802.3ad Dynamic LACP
  • Quality of Service (QoS)
  • 802.1p Class of Service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth Control per port
  • Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
  • VLAN
  • Multiple management VLAN assignment
  • Asymmetric VLAN
  • 802.1Q Tagged VLAN
  • Dynamic GVRP
  • Up to 256 VLAN groups, ID Range 1-4094
  • Private VLAN (Protected Ports)
  • Voice VLAN (10 user defined OUIs)
  • Multicast
  • IGMP Snooping v1, v2, v3 (per VLAN)
  • Static Multicast Address
  • Up to 256 multicast entries
  • Port Mirror
  • RX, TX, or Both
  • One to one
  • Many to one
  • Encryption
  • 802.1X Port-Based Network Access Control, RADIUS, TACACS+
  • Local Dial In User Authentication
  • DHCP Snooping (per VLAN)
  • Loopback Detection
  • Duplicated Address Detection
  • Trusted Host
  • Denial of Service (DoS)
  • ACL IPv4 L2-L4 & IPv6
  • MAC Address
  • VLAN ID
  • Ether Type (IPv4 only)
  • IP Protocol 0-255
  • TCP/UDP Port 1-65535
  • 802.1p
  • DSCP (IPv4 only)
  • IPv6 Address (IPv6 only)
  • Compatibility
  • Optional Software Utility: Windows® 8.1 (32/64-bit), 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit), Windows® 2003/2008 Server (32/64-bit)
  • Special Features
  • PoE+
  • Fanless design
  • IPv6
  • 802.3az power saving
  • Rack mountable
  • Power
  • Input: 100 - 240 V AC, 50/60 Hz, internal power supply
  • Consumption: 92.3 Watts (Max)
  • PoE budget: 75 Watts
  • Fan/Acoustics
  • Quantity: 0
  • Noise Level: 0 dB(A) (max.)
  • MTBF
  • 545,798 hours
  • Operating Temperature
  • 0 – 45 °C (32 - 113 °F)
  • Operating Humidity
  • Max 90% non-condensing
  • Dimensions
  • 330 x 183 x 44.45 mm (13 x 7.2 x 1.75 in.)
  • Rack mountable 1U height
  • Weight
  • 1.9 kg (4.1 lbs.)
  • Certifications
  • CE
  • FCC
  • Warranty
  • 3-year limited
 

Package Contents

  • TPE-1020WS
  • Quick Installation Guide
  • CD-ROM (Utility & User’s Guide)
  • Power cord (1.8 m/6 ft.)
  • Rack mount kit
DIY: Using PoE Technology to Install IP Cameras