TRENDnet's 9 dBi Outdoor PoE Access Point, model TEW-730APO, provides wireless N300 (2.4 GHz) building-to-building connectivity. It supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes. Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes. The rugged IP55 rated TEW-730APO comes with a proprietary PoE injector and a pole mounting kit.
Building-to-Building
An integrated 9 dBi directional antenna, WiFi N300, and an included PoE injector facilitate building-to-building networking.
Installation Flexibility
A variety of installation scenarios are supported with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes.
Outdoor Ready
Built for protected outdoor locations with an IP55 weather rating and an operating temperature range of -20 – 70 °C (-4 – 158 °F).
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1X
- IEEE 802.11f
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (up to 300 Mbps)
|
Hardware Interface | - 1 x 10/100 Mbps (proprietary PoE) port**
- Reset button
- LED indicators
- Grounding point
|
Special Features | - IP55 weather rated
- 802.1Q VLAN assignment per SSID
|
Access Control | - Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
- Firewall (CPE Mode): NAT, Port Forwarding, DMZ Host
- Access Controls: MAC, IP Filter, Port Filter, Per-SSID client limiting
- 802.1Q VLAN
|
QoS | |
Operation Modes | - Fat AP
- Thin AP
- Virtual AC
- Virtual AC + Thin AP
|
FAT AP Modes | - Access Point (AP)
- Client (Client + AP)
- CPE (Client + Bridge)
- WDS Bridge
- WDS Repeater
|
SSID | |
Internet Connection Types (CPE mode) | - Dynamic IP (DHCP)
- Static IP (Fixed)
- PPPoE (Dynamic IP)
|
Management/Monitoring | - Local/remote web based management (HTTP, HTTPS)
- Local/remote CLI based management (Telnet, SSH)
- SNMP v2/v3
- CPE Management
- Upgrade firmware
- Backup/restore configuration
- Event logging
- Syslog
- Reboot
- Restore to factory defaults
- Ping test
- Ping Watchdog
- Trace Route
- STP
- STP forward delay
- Traffic Shaping
- MAC based access control
|
Frequency | - FCC: 2.412 – 2.462 GHz
- ETSI: 2.412 – 2.472 GHz
|
Wireless Channels | |
Modulation | - 802.11b: DBPK, DQPSK, CCK with DSSS
- 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
- 9 dBi internal directional antenna
|
Wireless Output Power/Receiving Sensitivity | - 802.11b: FCC/ETSI: FCC: 24 dBm (max.), ETSI: 11 dBm (max.)/ -85 dBm (typical) @ 11 Mbps
- 802.11g: FCC/ETSI: FCC: 22 dBm (max.), ETSI: 11 dBm (max.)/ -70 dBm (typical) @ 54 Mbps
- 802.11n: FCC/ETSI: FCC: 20.5 dBm (max.), ETSI: 9 dBm (max.)/ -62 dBm (typical) @ 300 Mbps
|
EIRP | - FCC: up to 33 dBm (with built in 9 dBi antenna)
- ETSI: up to 20 dBm (with built in 9 dBi antenna)
|
Power | - Input: 100 – 220 V, 50 – 60 Hz, 0.6 A
- Output: 24 V / 1 A Consumption: 12 Watts Max.
|
Operating Temperature | - -20 – 70° C (-4 – 158° F)
|
Operating Humidity | |
Certifications | |
Dimensions | - 205 x 64 x 61 mm (8.1 x 2.5 x 2.4 in.)
|
Weight | |
Warranty | |
PACKAGE CONTENTS |
- TEW-730APO
- CD-ROM (User's Guide)
- Quick Installation Guide
- Poll mounting hardware
- Proprietary PoE injector (24 V, 1 A)
- Power Cord
- Grounding wire
|
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna align-ment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
**Recommended max. PoE cable length of 70 m
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.