Login to My Account   Partners  
Click to change countryUnited States (change)

Gigabit Power over Ethernet (PoE) Splitter

TPE-114GS (Version v1.1R)

  • Used to install a non-PoE device in remote locations
  • Splits a networked PoE signal into separate power and Gigabit data sources
  • Set the output power to either 5V, 7.5V, 9V, or 12V
  • Use this compact device with TRENDnet PoE switches or injectors
  • Save on installation and equipment costs

The TPE-114GS (Version v1.1R) has been discontinued.  For a list of discontinued products, click here.
Watch product spotlight video:

The Gigabit Power over Ethernet Splitter, model TPE-114GS, is used to install non-PoE devices in remote locations. It splits a networked PoE signal into separate power and Gigabit data sources. Run an Ethernet cable from a Gigabit PoE switch (or injector) for distances up to 100 meters and then split the PoE signal into separate Gigabit data and power sources in order to network a non-PoE device.

No need to install non-PoE devices near a power outlet. Save installation and equipment cost when installing access points, IP cameras, and more in a remote location. A handy toggle switch adjusts output power to 5V, 7.5V, 9V, or 12V in order to match non-PoE device power requirements. This compact splitter safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.

  • Converts non-PoE devices with Power over Ethernet support
  • 1 x 10/100/1000Mbps PoE Auto-MDIX Data In port
  • 1 x 10/100/1000Mbps Auto-MDIX Data Out port
  • Power out port
  • 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.0mm pin connection to powered device
  • 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.5mm pin connection to powered device
  • For a product with a 1mm pin power connection, use this product with TRENDnet’s TV-JC35 (3.5mm to 1mm Jumper Cable)
  • Power LED indicator
  • Install non-PoE devices where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network device with short circuit protection
  • Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output
  • Auto-sensing power drawn from 802.3af power source equipment(PSE) devices
  • Light weight and compact size
  • Wall mounting points
  • 3-year limited warranty
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab Gigabit Ethernet
  • IEEE 802.3x Flow Control
  • IEEE 802.3af Power over Ethernet
Network Media
  • 10Mbps: UTP/STP Cat. 5 Up to 100 meters
  • 100Mbps: UTP/STP Cat. 5 and 5e Up to 100 meters
  • Gigabit: UTP/STP Cat. 5e and 6 Up to 100 meters
  • 1 x 10/100/1000Mbps Data and Power In
  • 1 x 10/100/1000Mbps Data Out
  • 1 x 5.5mm pin Power Out
  • Adjustable output power DIP switch (5V, 7.5V, 9V, 12V)
  • Power In: 48VDC 0.4A
  • Power Out: 5V(2A), 7.5V(2A), 9V(1.7A), 12V(1.5A)
Power Consumption
  • Max. 0.3 watt
Jumper Cable
  • 1 x (2.0 x 2.0mm)
  • 1 x (2.5 x 2.0mm)
  • 70 x 55 x 27mm (2.75 x 2.2 x 1 in.)
  • 65 g (2.3 oz.)
  • Operation: 0C~45C (32F~ 113F)
  • Storage: -20C~90C (-4F~194 F)
  • Max. 90% (non-condensing)
  • CE, FCC
  • TPE-114GS
  • Quick Installation Guide
  • 2 x Power Jack (2.0 x 2.0mm, 2.0 x 2.5 mm)