Login to My Account   Partners  
Click to change countryUnited States (change)
 
Network Cable Tester
TC-NT2 (Version v1.1R)
  • Comprehensive cable tester for network professionals
  • Tests Ethernet, USB, and BNC cables
  • Accurately test pin configurations for cable lengths up to 300 meters (984 ft.)
  • Identifies severed, short circuit, and cross connected pins
  • Continuous scan and manual scan modes
  • Includes BNC to Ethernet converters
  • Handy travel case

TRENDnet’s Network Cable Tester, model TC-NT2, is a comprehensive cable tester for network professionals. It accurately checks pin configurations for Ethernet cables, USB cables, BNC cables, and patch panel ports. The TC-NT2 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft.). All components fit into a handy travel case.

Hardware
Local and Remote Testing
A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit
Continuous Scan
Continuous scan mode is design to accommodate testing with cable ends in different locations
Manual Scan
Manual scan is well suited for loop back cable testing
Cables and Ports
Accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports
Cable Distance
Tests over cables lengths of up to 300 meters (984 ft.)
PIN Tests
Identifies proper, severed, short circuit, and cross connected pins
  • Test Pin Configuration
  • 10/100/1000 Base-T, 10 Base-2 (Coax)
  • RJ-11/RJ-12/RJ-45
  • EIA/TIA-356A/568A/568B
  • Token ring cables
  • Compatible Cables*
  • Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
  • Coax cable
  • USB and 1394 cable (with TC-NTUF)
  • Transmitter Unit Interface
  • 2 x test ports
  • Manual test button
  • Auto test button
  • Power/tone switch
  • LED indicators
  • Receiver Unit Interface
  • Test port
  • LED indicators
  • Tone Frequency
  • 600 - 800 Hz
  • Special Features
  • Test grounding of shielded (screened) cable
  • Identifies proper, severed, short circuit, and cross connected pins
  • Build-in tone generator for tracing cable with standard Tone Probe (TC-TP1)
  • Test USB and IEEE 1394 cables with optional adapters (TC-NTUF not included)
  • Power Source
  • Transmitter: 9 V DC battery (not included)
  • Receiver: powered by master transmitter via connected cable
  • Operating Temperature
  • 0 - 50°C (32 - 122°F)
  • Operating Humidity
  • Max. 95% non-condensing
  • Certifications
  • CE
  • Dimensions
  • Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
  • Receiver: 117 x 32 x 27 mm (4.6 x 1.3 x 1.1 in.)
  • Weight
  • Transmitter: 108 g (3.8 oz.)
  • Receiver: 44 g (1.6 oz.)
  • Warranty
  • 1 year limited
 

Package Contents

  • TC-NT2
  • Quick Installation Guide
  • 2x RJ-45-to-BNC adapter
  • Network patch cable
  • Carry pouch