The TE100-DS24 dual speed stackable fast Ethernet hub provides a phenomenal level of flexibility and ease of use for migration to higher bandwidth network environments. Each port auto-senses between 10Mbps Ethernet and 100Mbps Fast Ethernet. Once the port speed is determined, the hub creates independent segments for the 10Mbps and 100Mbps ports. Linking the 10Mbps and 100Mbps segments together is achieved through an optional switch module. The optional TE100-DSM switch module can be installed in any hub in the stack, making it possible to transparently bridge between 10Mbps and 100Mbps segments. In a managed hub stack, more than one TE100-DSM module can be used to provide automatic redundancy. One 100Base-TX switched port module and one switched 100Base-FX port are also available, in addition to the TE100-DSM switch module, for greater configuration flexibility.
- Plug and Play installation with automatic port configuration
- Supports 24 10/100Mbps auto-sensing and auto-negotiation ports
- Uplink port provides easy expansion to another hub
- Stackable to five units for a total of 120 ports
- Scalable expansion of up to two stacks for a total 238 ports
- TE100-DM24 stacks can make use of additional switch modules for redundancy
- EIA-19" rack mountable
- High visibility LED indicators provide status for each port
- Bandwidth utilization LED array for traffic volume display
- Automatic Hub ID assignment and front panel display
- Built-in auto-partitioning instantly isolates network failures
- One RS-232 port allows local terminal access to hub configuration, diagnosis, and firmware upgrade
- Slide-in switch module allows bridging between 10Mbps and 100Mbps segments, just one switch module is required for entire stack
- Slide-in switch module for one 100Base-TX connections or one 100Base-FX connection
- 5-year limited warranty
Hardware |
Standards: | - IEEE 802.3µ 100Base-TX/100Base-FX, and IEEE 802.3 10Base-T
|
Protocol: | |
Speed: | - 10Mbps for 10Base-T/100Mbps for 100Base-TX
|
Cabling: | - CAT 3, 4, 5 UTP/STP for 10Base-T
- CAT 5 UTP/STP for 100Base-FX 62.5/125 micron multi mode SC fiber (2km)
|
Daisy-Chain Port: | |
LED's: | - Per Hub: Power, Collision (10, 100) Slot 1 or 2, Hub ID, Bandwidth Utilization %
- Per Port: Link/Rx, Auto Partition, Disable, Port Speed (10Mbps, 100Mbps)
|
Power: | - Internal Power Supply, (100 - 240V, 50/60Hz)
|
Dimensions: | - 441 x 237 x 55 mm / 17.36" x 9.33" x 2.17" (L x W x H)
|
Weight: | |
Temperature: | - Operating: -10° to 55° C / 14° to 131° F
- Storage: -25° to 80° C / -13° to 176° F
|
Humidity: | - 5% to 95% (non-condensing)
|
Certification: | - FCC, UL, VCCI, CSA, C-tick, TUV, CE
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.