General |
Video | - Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter
- Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
|
Audio | - Line In: 3.5mm jack ( CCTV audio)
- Line Out: 3.5mm jack (Speaker)
- Codec: PCM/AMR
- 2 Way audio supported
|
GPIO | - Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
|
SD Slot | - Supports SD/SDHC (up to 32GB)
|
Pan/Tilt/Zoom | - Protocol: Pelco D, Pelco P
- 32 presets
- Auto Patrol
|
Hardware |
Network | - IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX
|
LED | |
Reset Button | - Push and release to reboot
- Push and hold for 5 seconds to restore to factory default
|
Power Consumption | |
Power | - 12V, 1.5A external power adapter
|
Dimension | - 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
|
Weight | |
Temperature | - Operating: 0°C ~ 45°C (32°F ~ 113°F)
- Storage: -15°C ~ 60°C (5°F ~ 140°F)
|
Humidity | - Max. 85% (non-condensing)
|
Certifications | |
Requirement |
Management Interface | - Internet Explorer 6.0 or above
|
To run Utility | - Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
|
Network Protocols | - TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP
|
Management |
Remote | - Remote management supported
|
Backup / Restore | - Save/retrieve configuration files
|
Settings |
Image | - Brightness, contrast, saturation, Hue, WDRC (Wide Dynamic Range Correction)
|
Video Encoder | - Encoding type: H.264, MPEG4, MJPEG
- Resolution/Frame rate(auto-sensing)704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
- 704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
- Compression: 5 levels
|
Recording | - Recording type: continuous, schedule, or motion detection
|
Port Settings | - HTTP port: 80 (default), RTSP (554)
|
Digital Zoom | |
Dynamic DNS | |
Time | - Synchronize with NTP server or set time/date manually
|
SMTP | - Supported up to 2 destination email accounts
|
System Log | |