Step 1 Open your web browser and type the IP address of the TV- IP200 (w)
in the address bar. The default IP address is 192.168.0.20.
Step 2 Click on “System Administration”.
Step 3 Click on “System” at the top of the screen. Step 4 Input the ESS-ID, Channel and if you have Encryption setup on our network,
you will need to input that information as well, the click “Save”. Note: All
information has to match that of your wireless Router or access point. Step 5 After saving the information, unplug the Ethernet cable from the back
of the camera, next, unplug the power from the back of the camera for 10 seconds. Step 6 Plug the power back into the camera and wait for 30 seconds. Step 7 Open your web browser and type the IP address of the TV- IP200 (w) in
the address bar. The default IP address is 192.168.0.20.
United States [
(0.0)
