Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Put a check mark in the Enable box. Rename the servic...
The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following:
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and pas...
Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel.
Double-Click on the Network Connection icon.
Right-Click on the Local Area Connection icon then click on Properties.
Highlight the Internet Protocol (TCP/I...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on LAN on the left hand side.
Change the IP addre...
The default username & password for the TWG-BRF114 are both (blank). There is no username and password set by default....
The default IP address for the TW100-BRF114U is 192.168.0.1.
Locate the reset button on the back of the TWG-BRF114.
Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration.
...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on Password on the left hand side.
Enter in t...
Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address.
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). ...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on WAN Port on the left hand side.
Choose PPPoE f...
Аппаратура |
Стандарты | IEEE 802.3, 802.3u и 802.3ab |
Протоколы | NAT, PPPoE, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1 и DDNS |
Брандмауэр | NAT, инспекция пакетов, предупреждения по эл. почте об атаках с ведением журнала, учет DoS-атак |
Безопасность | Контроль доступа |
Локальный порт | 4 x RJ45 10/100/1000 Мбит/с Gigabit Ethernet Auto-MDI/MIDX |
Интернет-порт | 1 экранированный RJ45 10/100/1000 Мбит/с Gigabit Ethernet Auto-MDI/MIDX |
Кнопка сброса | Восстановление заводских параметров по умолчанию |
СИД | Питание, Состояние, Связь/Работа, 10 ,100, 1000 LAN и WAN |
Питание | Внешний силовой адаптер, 12В пост. тока, 800mА |
Габариты (ДхШхВ) | 141 x 100 x 27 мм (5,5 x 3,9 x 1,06 дюйма) |
Масса | 363 г (12,8 унции) |
Температура | - При работе: 0° to 40° C (32° to 104° F)
- При хранении: -10° to 70° C (14° to 158° F)
|
Влажность | - При работе: 0 % ~ 80 % (без конденсации)
- При хранении: 0% ~ 95% (без конденсации
|
Сертификация | CE |
|
Содержимое упаковки |
- TWG-BRF114
- Руководство по быстрой установке
- CD-ROM (руководство пользователя)
- Внешний силовой адаптер
|
Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.