Имя файла : EN_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
1.2.2019
Размер файла
2.07 MB
Имя файла : FR_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
29.9.2017
Размер файла
2.07 MB
Имя файла : GE_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
29.9.2017
Размер файла
2.07 MB
Имя файла : PO_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
29.9.2017
Размер файла
2.07 MB
Имя файла : SP_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
29.9.2017
Размер файла
2.07 MB
Имя файла : IT_datasheet_TI-UF11SFP_(v1.0R).pdf
Дата
29.9.2017
Размер файла
2.07 MB
Имя файла : English_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
3.50 MB
Имя файла : French_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.74 MB
Имя файла : German_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.01 MB
Имя файла : Portuguese_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.02 MB
Имя файла : Spanish_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.01 MB
Имя файла : Russian_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.00 MB
Имя файла : Italian_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Дата
17.9.2021
Размер файла
2.00 MB
PNG Image
Размер файла: 3.83 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 2.52 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 2.68 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 3.74 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 2.70 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 3.82 MB
Дата: 9/15/2017
Загрузка
PNG Image
Размер файла: 1.58 MB
Дата: 9/15/2017
Загрузка
The TRENDnet TI-UF11SFP supports 802.3af, 802.3at or 802.3bt draft. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE power sourcing equipment. Many non-standard PoE devices ...
Each switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX. ...
Please refer to the user's guide for dip switch function number. When connecting two fiber converters make sure they are both set to forced mode on the fiber port. If using LLCF or LLR only one side should be enabled. ...
To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive co...
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our fiber converters. If the third party converter adheres to specifications and also does not use proprietary measures they should be compatible. ...
The fiber connection is not auto-negotiable. You will need to pair a Gigabit fiber converter with a Gigabit fiber converter or a Fast Ethernet fiber converter with a Fast Ethernet fiber converter. ...
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3z
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3bt draft
|
Device Interface | - 1 x Gigabit UPoE port
- 1 x 100/1000Mbps SFP slot
- 4-pin removable terminal block
- LED indicators
- DIP switch
- DIN-Rail mount
- Wall mount
- Grounding point
|
Data Transfer Rate | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit: 2000Mbps (full duplex)
|
Performance | - Data RAM Buffer: 1MB
- Jumbo Frame: 9KB
- MAC Address Table: 2K
|
Special Features | - Hardened components rated for extreme temperatures
- Auto-Negotiation
- Automatic address learning and address aging
|
Power | - Input: 48 – 56V DC
- Required power supply: TI-S15052, TI-S15052, TI-S12048 (sold separately)
- Max. consumption: 72W
|
PoE | - Pin 3, 6, 4, 5 for power (+) and pin 1, 2, 7, 8 for power (-)
- Power budget: 60W
|
Terminal Block | - Power and relay inputs, 4 pin
- Wire range: 0.34mm^2 to 2.5mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5lbs. – In / 0.5Nm / 0.56 Nm
- Wire strip length: 7-8mm
|
DIP Switch | - 1: reserved, no function
- 2: set SFP speed to 100Mbps or 1000Mbps
|
MTBF | |
Housing | - IP30 aluminum housing
- DIN-Rail mount
- Wall mount
- Grounding point
|
Operating Temperature | |
Operating Humidity | |
Dimensions | - 103.5 x 81.5 x 32mm (4 x 3.2 x 1.2 in.)
|
Weight | |
Certifications | - CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
- EN60950-1 (LVD)
|
Warranty | |
Содержимое упаковки |
- TI-UF11SFP
- Quick Installation Guide
- Removable terminal block
- DIN-Rail and wall mount kit
|
Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.