Маршрутизатор для беспроводной связи MIMO 108 Мбит/с 802.11g

File name:
Встроенное ПО_TEW-611BRP_1.0.7.ZIP, Sept. 12, 2007

Description:
TEW-611BRP 802.11g MIMO Wireless Router, Встроенное ПО version 1.0.7.

Встроенное ПО file: "611BRP_107.bin"

Release Note:
Встроенное ПО version 1.0.7
1. Corrected “schedule” not working properly with "Access Control"
(i.e. the Access Control is still active, even the scheduled time frame had passed).
[Note]: If your Router's firmware version is 1.0.2 or earlier, please upgradeto 1.0.4, 1.0.6, and then to 1.0.7.

Встроенное ПО Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.

Warning!
Встроенное ПО upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Встроенное ПО Upgrade requires resetting the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not restore the previously saved Router "configuration file" to the new firmware. We apologize for the inconvenience.

If you need assistance performing the firmware upgrade or if you have any questions, please contact our Technical Support Team http://www.trendnet.com/support.

Release Note:
Встроенное ПО version 1.0.4 and 1.0.6

1. Fixed "Mac OS X Wireless Station cannot associate with the Router when the wireless security is in "WPA2/WPA" and
   "WPA2 only" modes".
2. Modified "Virtual Server" mechanism to allow using the second IP of the Router's DHCP pool as Virtual Server.

Встроенное ПО History:
Встроенное ПО version 1.0.4

1. Modified WAN port connection to support full-duplex mode (increase WAN port "Internet" connection performance).
   Встроенное ПО version 1.0.3
2. Fixed "Router hanged after firmware upgrade" issue for units with 1.0.2 firmware.

Встроенное ПО version 1.0.2

1. Corrected "WDS Wireless Bridge/Repeater function not working", if the WEP (wireless encryption) is enabled.
2. Fixed admin password does not record 0 (zero). e.g. if password is 001234, user can still login the Router's
   configuration page with password: 1234.

Встроенное ПО Upgrade Instruction:

Please update the firmware 1.0.4 first and then to 1.0.6

For firmware update instructions, please see Руководство пользователя.