NÃO atualize firmware em nenhum produto da TRENDnet utilizando conexão wireless
Atualização de firmware sobre conexão wireless pode causar dano ao produto. Por favor execute a atualização de firmware somente com conexão cabeada.
Firmware_TEW-611BRP_1.0.7.ZIP, Sept. 12, 2007
TEW-611BRP 802.11g MIMO Wireless Router, Firmware version 1.0.7.
Firmware file: "611BRP_107.bin"
Firmware version 1.0.7
1. Corrected “schedule” not working properly with "Access Control"
(i.e. the Access Control is still active, even the scheduled time frame had passed).
[Note]: If your Router's firmware version is 1.0.2 or earlier, please upgradeto 1.0.4, 1.0.6, and then to 1.0.7.
Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware Upgrade requires resetting the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not restore the previously saved Router "configuration file" to the new firmware. We apologize for the inconvenience.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Technical Support Team http://www.trendnet.com/support.
Nome do arquivo: Firmware_TEW-611BRP_1.0.7.zip