Nome del file: EN_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
2/11/2019
Dimensioni del file
541.34 KB
Nome del file: FR_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
538.58 KB
Nome del file: GE_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
540.86 KB
Nome del file: PO_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
545.39 KB
Nome del file: SP_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
544.21 KB
Nome del file: RU_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
551.28 KB
Nome del file: IT_datasheet_TEG-MGBS10_(v3.2R).pdf
Data
5/7/2018
Dimensioni del file
545.83 KB
Nome del file: QIG_SFP_Module_TEG-MGBSX_MGBS10_MGBS40.pdf
Data
9/20/2021
Dimensioni del file
2.72 MB
PNG Image
Dimensioni del file: 2.06 MB
Data: 5/7/2018
Scarica
PNG Image
Dimensioni del file: 2.08 MB
Data: 5/7/2018
Scarica
PNG Image
Dimensioni del file: 1.95 MB
Data: 5/7/2018
Scarica
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. They should be connected TX to RX and RX to TX. ...
You will need to identify the type of fiber cable you have. Whether it is multi-mode or single mode, if it is 62.5/125 μm or 50/125 μm, etc. Typically you can verify the cable type from the cable jacket, your network documentation or the specifications of the devices you currently have con...
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our SFP modules. If the third party switch adheres to specifications and also does not use proprietary measures they should be compatible. ...
TRENDnet SFP module TEG-MGBS10 has an LC type connector.
Lunghezza d'onda | |
Potenza ottica in uscita (dBm) | |
Potenza ottica in ingresso (dBm) | |
Budget potenza | |
Distanza | |
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.