Registrate il vostro prodotto
Registrate il vostro prodotto per restare informati sugli ultimi aggiornamenti del prodotto e sulle informazioni inerenti la garanzia.
-
Entrate nel Vostro Account
- | Partner
- |
Italy (cambia)
ProView Wireless N Pan/Tilt/Zoom Internet Camera
TV-IP602WN (Version v1.0R)
- Copertura fino a 4 volte maggiore rispetto alle videocamere IP wireless g
- Spostamento in orizzontale di 312° e in verticale di 115°
- Registrazione in base al rilevamento di movimento, allarmi e-mail e tante altre funzioni con il software supplementare
- Connessione WPS (Wi-Fi Protected Setup) al semplice tocco di un pulsante
- Audio a 2 vie
DISCONTINUED PRODUCT
The TV-IP602WN (Version v1.0R) has been discontinued.
It has been replaced by the TV-IP420P (Version v1.0R).
For a list of discontinued products, click here. Utilità
Version: 1.2.3.2904
Release Date: 3/2011
Nome del file: SetupWizard(1.2.3.2904).zip
SHA-1 Checksum: 111694484772DF57FE9771FA93D540C8F1BF3013
Data
7/27/2017
7/27/2017
Dimensioni del file
1.29 MB
1.29 MB
Version: 2.0.5.3107
Release Date: 3/2011
Nome del file: IPViewPro(1.0.5.3107).zip
SHA-1 Checksum: 9D51F483BE413CBFEB75F00954354344744CF098
Data
7/27/2017
7/27/2017
Dimensioni del file
3.76 MB
3.76 MB
Firmware
NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Firmware Version: 1.0.2
Firmware Release Date: 5/2013
Note:
- Fixes security vulnerabilities
Nome del file: FW_TV-IP602WN(1.0.2).zip
SHA-1 Checksum: FEF2049BF7699108B551613B20BC208D7A6ED137
Data
7/27/2017
7/27/2017
Dimensioni del file
6.23 MB
6.23 MB
Software
Software Version: 2.5.9
Release Date: 4/2017
Notes:
- Fixed TV-IP420P P/T issue
Nome del file: TRENDnetViewPro(2.5.9).zip
SHA-1 Checksum: 7CD1D9AE621816395E9FE9644B651F3696388215
Data
7/27/2017
7/27/2017
Dimensioni del file
41.15 MB
41.15 MB
Scheda tecnica
Nome del file: EN_spec_TV_IP602WN(V1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
769.07 KB
769.07 KB
Nome del file: FR_spec_TV_IP602WN(v1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
749.74 KB
749.74 KB
Nome del file: GE_spec_TV_IP602WN(v1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
777.95 KB
777.95 KB
Nome del file: SP_spec_TV_IP602WN(V1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
786.67 KB
786.67 KB
Nome del file: RU_spec_TV_IP602WN(V1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
752.55 KB
752.55 KB
Nome del file: IT_spec_TV_IP602WN(V1.0R).pdf
Data
4/5/2011
4/5/2011
Dimensioni del file
776.18 KB
776.18 KB
Guida rapida per l'installazione
Nome del file: EN_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
4.85 MB
4.85 MB
Nome del file: FR_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
4.87 MB
4.87 MB
Nome del file: GE_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
4.25 MB
4.25 MB
Nome del file: PO_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
4.80 MB
4.80 MB
Nome del file: SP_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
4.24 MB
4.24 MB
Nome del file: RU_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
5.23 MB
5.23 MB
Nome del file: EST_Web_TV-IP602WN(1.01).pdf
Data
3/30/2011
3/30/2011
Dimensioni del file
3.96 MB
3.96 MB
Guida per l'utente
Nome del file: UG_SecurViewPro.pdf
Data
6/1/2012
6/1/2012
Dimensioni del file
4.66 MB
4.66 MB
Immagine/i del prodotto
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names.
Unfortunately the camera does not support SSL. If the email provider requires SS...
Unfortunately the cameras from different families do not share a common free application and cannot be used together. SecurView cameras will not function in IPView Pro (2) and vice versa....
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
Unfortunately IPView Pro 2 is not compatible with Macintosh operating systems.
The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30.
In general, your router has a DHCP server. When you connect the camera to your Router, the Router would assign the camera an IP address.
...
Motion detection recording is provided through the IPView Pro 2 application. Start IPView Pro and click on the Configuration button.
Click on the Camera Settings tab and select the camera. Enable Motion Detecting and under the Action field enable "Recording".
Click on the "Configur...
Go to www.TRENDnet.com/downloads to download the latest firmware for the camera. Included with the download are instructions to upgrade the firmware.
...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Click on Setup and then the Network > Setup page and place a check to Enable Wireless.
Select your wireless network...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera click on Setup then the Action > Snapshot page and place a check mark into "Enable...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera click on Setup then the Action > Snapshot page and place a check mark into "Enable...
Once you have the camera configured on your network start IPView Pro 2. If you are adding the first camera, skip to Step 3.
If you have already added a camera previously do the following.
Click on the "Configure" button then click on the "Add Camera in local LAN" button. It will search you...
Internet Explorer 7.0 or above.
Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
Press and hold in the reset button on the back of the camera for approximately 10 seconds while the power is on to restore the factory default settings. ...
The link LED will illuminate when there is an active connection to a network. It will blink when traffic is being sent to and from the camera. The Power LED will illuminate when power is supplied to the camera. ...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following to configure the cameras Admin username and password.
-Click o...
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address. The camera will update the DDNS record to reflect the new IP address. This ensures that each time you go to the hostn...
You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView using the public IP address.
Refer to your rou...
| Videocamera | |
| Informazioni generali | Sensore: Sensore a colori 1/4" CMOS Lente ampia Lente focale: 4.57mm F/No: 1.9 Illuminazione minima: 0.5 lux Profondità fuoco: 20 cm ~ infinito Ripresa: orizzontale: 45.7 ° verticale: 35.1 ° Diagonale: 55.6 ° Zoom Digitale: 16x |
| Audio | Microfono omnidirezione entrocontenuto Sensibilità: -42dB +/- 3dB (5 metri max.) Frequenza: 50~16000Hz S/N:>58dB Codec: ARM/PCM Uscita altoparlanti esterni (altoparlante venduto separatamente) Audio a due vie con cancellazione eco |
| Pan & Tilt | Pan: -156° ~ +156° Tilt: in alto 70° in basso 45° Posizioni preimpostate: 10 posizioni |
| Imaggini & Video |
|
| Hardware | |
| Rete | IEEE 802.3u 10/100Mbps Auto-MDIX Fast Ethernet |
| Esposizione di LED | Alimentazione, collegamento/attività |
| Pulsante reset | Ripristina la configurazione di fabbrica |
| Consumo elettrico | 10.1 Watts (max. a motore acceso) 5,6 Watts (max. a motore spento) |
| Alimentazione | Adattatore d'alimentazione esterno 12V, 1.5A |
| Dimensioni | 112 x 130 x 110mm (4.4 x 5.1 x 4.3 in.) |
| Peso | 485g (1.1lb) |
| Temperatura |
|
| Umidità | Max. 85% (senza condensa) |
| Certificazioni | CE, FCC |
| Requisiti | |
| Interfaccia di gestione | Internet Explorer 7.0 e 8.0 |
| Per eseguire IPView Pro | Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit) |
| Software IPView Pro 2.0 | Canali: supporta fino a 32 telecamere Memorizza/Playback/Rivela Moto/Audio |
| Protocolli di rete | IPv4, ARP, TCP, UDP, ICMP DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client HTTP Samba Client PPPoE UPnP RTP (Real Time Protocol) RTCP (Real Time Control Protocol) RTSP (Real Time Streaming Protocol) |
| Senza Fili | |
| Standard | IEEE 802.11b, IEEE 802.11g, e IEEE 802.11n |
| Frequenza | 2.4 ~ 2.497 GHz ISM band |
| Modulazione | DQPSK, DBPSK, DSSS e CCK |
| Antenna | 2 Antenna dipolo staccabile 2dBi con Connettore SMA Reverse |
| Velocità dati |
|
| Cifratura | 64/128-bit WEP, WPA/WPA2-PSK |
| Potere dell'uscita |
|
| Sensibilità di ricezione |
|
| Canali | 1~11 (FCC), 1~13(ETSI) |
| Gestione | |
| Accounts | Fino a 22 accounts |
| Login remoto | Gestione remota supportati |
| Backup / Restore | Salvare / recuperare i file di configurazione |
| Log | System log fino a 500 entries |
| impostazioni | |
| Immagine | Luminosità, contrasto, riduzione rumore, saturazione, vivacità, bilanciamento bianco, flip, specchio (orizzontale/verticale), bianco/nero, giorno, notte, Modalità programmazione |
| Video Setting | Tipo di codifica: MJPEG
|
| Impostazioni ambiente | Attiva/disattiva modalità notturna Interno / esterno Otturatore: 1/3.25s, 1/7.5s e 1/15s |
| 3GPP | Audio codec/AMR Video codec/MPEG4 Protocols/RTSP, RTP |
| Memorizzazione |
|
| Istantanea |
|
| Regolazione Porte | HTTP porta: 80 (default) RTSP porta: 554 (default) |
| DNS dinamico | Si |
| Tempo | Sincronizza con server NTP o seleziona tempo/data manualmente |
| CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
