NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Firmware Version: 1.02
Release Date: 03/2012
Note: Prima emissione
Note:
*Never upgrade firmware via a wireless connection
**After successfully upgraded the firmware, please reset the unit to factory default
***Please refer to the Firmware Upgrade Procedure.pdf in .zip file for instruct
Nome del file: TEW-676APBOv1(FW1.02).zip
SHA-1 Checksum: 8199207C982B639690D54200703A9B8959867E21
Data
7/25/2017
Dimensioni del file
3.56 MB
Nome del file: EN_spec_TEW-676APBO(v1.0R).pdf
Data
8/29/2012
Dimensioni del file
518.52 KB
Nome del file: FR_spec_TEW-676APBO(v1.0R).pdf
Data
8/29/2012
Dimensioni del file
563.45 KB
Nome del file: GE_spec_TEW-676APBO(v1.0R).pdf
Data
8/29/2012
Dimensioni del file
566.00 KB
Nome del file: SP_spec_TEW-676APBO(v1.0R).pdf
Data
8/29/2012
Dimensioni del file
563.08 KB
Nome del file: RU_spec_TEW-676APBO(v1.0R).pdf
Data
2/7/2014
Dimensioni del file
995.15 KB
Nome del file: IT_spec_TEW-676APBO(v1.0R).pdf
Data
8/29/2012
Dimensioni del file
555.67 KB
Nome del file: EUNL_TEW-676APBO(V1.0R).pdf
Data
4/19/2013
Dimensioni del file
4.92 MB
Nome del file: EN_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
1.31 MB
Nome del file: FR_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
1.39 MB
Nome del file: GE_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
1.32 MB
Nome del file: PO_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
1.28 MB
Nome del file: SP_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
1.32 MB
Nome del file: RU_Web_TEW-676APBO(1.01).pdf
Data
3/28/2012
Dimensioni del file
2.06 MB
Nome del file: UG_TEW-676APBO(v1.0R).pdf
Data
5/10/2012
Dimensioni del file
4.30 MB
JPEG Image
Dimensioni del file: 198.06 KB
Data: 3/28/2012
Scarica
JPEG Image
Dimensioni del file: 320.11 KB
Data: 3/28/2012
Scarica
JPEG Image
Dimensioni del file: 239.45 KB
Data: 3/28/2012
Scarica
TIFF Image
Dimensioni del file: 2.43 MB
Data: 3/28/2012
Scarica
TIFF Image
Dimensioni del file: 4.07 MB
Data: 3/28/2012
Scarica
TIFF Image
Dimensioni del file: 2.65 MB
Data: 3/28/2012
Scarica
Press and hold in the reset button for 10 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.100
Username: root
Password: root
SSID: TRENDnet676
Encryption: none...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default Username and Password are both root.
...
Log in to the first TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default username and password are both root.
Click Wizard > Wizard Setup then click Next.
Select WDS then click Next.
Each unit must be configured with a unique IP address. Set...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default Username and Password are both root.
Click on Wireless > Virtual AP Setup then click Edit next to the Primary AP.
Select the highest form of security supported by your wireless clients. ...
The TEW-676APBO comes with an internal high powered 12dBi patch antenna.
The TEW-676APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-676APBO. ...
The TEW-676APBO is a 5GHz device only. It does not support 2.4GHz wireless clients.
Press and hold in the reset button for approximately 15 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.100
Username: root
Password: root
SSID: TRENDnet676
Encryption: none
...
HARDWARE |
Standards | - Cablata: IEEE 802.3u (100Base-TX)
- Senza fili: IEEE 802.11a/n (5 GHz)
|
Indicatore LED | - Power (Alimentazione), LAN, WLAN (attività senza fili)
|
Antenna | - Antenna patch da 12dBi (polarization: V30°, H30°)
|
PoE | - 1 porto Ra 10/100Mbps PoE, Solo passiva (non conforme a 802.3af)
|
Dimensioni (L x A x P) | - 215 x 122 x 66 mm ( 8.5 x 4.8 x 2.6 pollici)
|
Peso | |
Consumo elettr | |
Gestione | - Browser Internet (HTTP/HTTPS), SNMP (v2c e 3), Telnet, SSH
|
Supporta Velocità vento | |
Impermeabile | |
Temperatura | - Stoccaggio: -20° ~ 60°C (-4°F ~ 140°F)
- Di esercizio: 0° ~ 60°C (32°F ~ 140°F)
|
Umiditài | - Max. 95% (senza condensa)
|
Alimentazione | - Ingresso e uscita iniettore PoE alimentazione DC: 48VDC, 0.4A
|
Certificazione | |
SENZA FILI |
Frequenza | |
Modalità | - Router, Access Point + WDS, WDS, CPE, Client Bridge + Ripetitore, CPE + Access Point
|
Virtual Access Points | |
Client associati (max) | - 224 (Modalità AP), 32 (Modalità Ripetitore)
|
Copertura* | |
Tecnica modulo | - 802.11a: OFDM con BPSK, QPSK, QAM e 64QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
|
Velocità dati (Auto Fallback) | - 802.11a: fino a 54Mbps
- 802.11a/n: fino a 300Mbps
|
Cifratura | - 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS per AP/CPE mode, WEP/WPA2-PSK per WDS mode MAC filter (20 elementi) e IP filtri (20 elementi)
|
Potere dell'uscita | |
Sensibilità di ricezione | - 802.11a: -91dBm (tipico) @ 29Mbps
- 802.11a/n: -68dBm (tipico) @ 300Mbps
|
Canali | |
CONTENUTO DELLA CONFEZIONE |
- TEW-676APBO
- CD-ROM (Manuale per l'utente)
- Guida di installazione rapida multi-lingue
- Hardware per il montaggio
- Iniettore PoE e cavo d'alimentazione
- Connettore RJ45 impermeabile (cavo Ethernet non incluso)
- Cavo messa a terra
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.