Nome del file: Utility_TE100-P2U1P.zip
SHA-1 Checksum: F8CA3C769BE8EF9FFCCD0B381ADA06BDEDBCF90A
Data
7/25/2017
Dimensioni del file
5.24 MB
NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Date: 7-12-2005
Nome del file:
Firmware_TE100P2U1P_6.10.17W Build0082.zip
Description:
MPS17TRE.BIN (5-3-2004) TE100-P2U1P Firmware 6.10.17 7-12-2005
Release Note:
Update from 6.9.17
1. Added "SMB over TCP/IP" support.
Firmware Upgrade Instruction:
1. Save the new firmware file on to hard disk.
2. Open web browser and go to print server's IP address.
3. From the web config page, click on "MISC", click on "upgrade from browser", click on "browse" to locatethe new firmware file, and then click on "upgrade".
Nome del file: Firmware_TE100P2U1P_6.10.17W_Build0082.zip
SHA-1 Checksum: 2118D915FC824950F08CDC2D83E7C1BF9C79E8E8
Data
7/25/2017
Dimensioni del file
248.35 KB
Nome del file: Spec_TE100-P2U1P(English).pdf
Data
1/3/2005
Dimensioni del file
173.84 KB
Nome del file: Spec_TE100-P2U1P(French).pdf
Data
1/17/2005
Dimensioni del file
303.48 KB
Nome del file: Spec_TE100-P2U1P(German).pdf
Data
2/7/2005
Dimensioni del file
197.75 KB
Nome del file: Spec_TE100-P2U1P(Portuguese).pdf
Data
2/25/2005
Dimensioni del file
196.14 KB
Nome del file: Spec_TE100-P2U1P(Spanish).pdf
Data
2/18/2005
Dimensioni del file
196.68 KB
Nome del file: QIG_TE100-P2U1P.pdf
Data
5/2/2013
Dimensioni del file
1.66 MB
Nome del file: UG_TE100-2U1P.pdf
Data
8/19/2004
Dimensioni del file
3.62 MB
Nome del file: FAQ_TE100P2U1P_P1P_P1U.pdf
Data
6/27/2006
Dimensioni del file
641.31 KB
JPEG Image
Dimensioni del file: 399.84 KB
Data: 9/1/2004
Scarica
TIFF Image
Dimensioni del file: 3.52 MB
Data: 9/1/2004
Scarica
JPEG Image
Dimensioni del file: 392.41 KB
Data: 5/4/2005
Scarica
TIFF Image
Dimensioni del file: 3.29 MB
Data: 5/4/2005
Scarica
Toner status, paper level, etc., will not be communicated back to the PC. In order to get printer status information, the proprietary printer driver has embedded code that needs to be passed on to the print server, decoded, then interpreted by the print server. TRENDnet print servers do not support ...
For the TEW-P1P/U the port name is lp1. For the P2U1P the port names are lp1 for the parallel, lp2 for the top USB and lp3 for the bottom USB. They are case sensitive....
Yes, but you must assign the print server an IP address from a Windows based operating system first. Once that is done you can use LPR or LPD printing for the Macs and you can manage the print server by entering its IP address into a web browser. Also the printer must be a postscript printer....
Step 1 Go to Start>Settings>Printers>Add New Printer (WinXP - Start>Printers
and Faxes>Add a Printer).
Step 2 Select Local Printer. Make sure to uncheck Automatically
detect and install my plug and play printer. Click Next.
Step 3 Select Create a New Port and select Standard
TCP/IP po...
In Windows 98/Me you will need to install the LPR client.
For Windows 98/ME you will also need to know the port name that you are printing
to (For the TEW-P1P/U the port name is lp1. For the P2U1P the port names are
lp1 for the parallel, lp2 for the top usb and lp3 for the bottom usb.
Inst...
Step 1 Open up the PS Admin utility. Highlight your Print server and click on
Properties.
Step 2 Click on TCP/IP tab.
...
If you are using Windows XP you will have to disable the built in firewall. But for all operating systems you have to disable any other form of firewall software such as Norton Internet Security, Black Ice, and Zonealarm....
Hardware |
LAN Standards: | - IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, ANSI/IEEE 802.3 auto-negotiation
|
LAN Port: | - 10/100Mbps UTP/STP RJ-45 port
|
Printer Interface: | - USB 1.1 complaint Type A female DB-25 (25 pin) parallel port
|
Network Cables: | - Cat. 3, 4, 5 UTP/STP for 10Base-T (100 meters max.)
- Cat. 5 UTP/STP for 100Base-TX (100 meters max.)
|
Supported Protocols: | - TCP/IP, IPX, NetBEUI, AppleTalk, and LPR
|
LED Indicator: | |
Power: | - 5V DC, 2A, External Power Adapter
|
Dimensions (W x Lx H): | - 105 x 177 x 33 mm (6.97 x 4.13 x 1.3 inches)
|
Weight: | |
Temperature: | - Operating Temperature: 0° ~ 50°C (32° ~ 122°F)
- Storage Temperature: -5° ~ 65°C (23° ~ 149°F)
|
Humidity: | - Operating: 0% ~ 70%
- Storage: 0% ~ 80%
|
Emissions: | |
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.