NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata.
Date: 7-12-2005
Nome del file: Firmware_TE100P2U1P_6.10.17W Build0082.zip
Firmware Upgrade Instruction: 1. Save the new firmware file on to hard disk. 2. Open web browser and go to print server's IP address. 3. From the web config page, click on "MISC", click on "upgrade from browser", click on "browse" to locatethe new firmware file, and then click on "upgrade".
Nome del file: Firmware_TE100P2U1P_6.10.17W_Build0082.zip
Per Port: Link/Rx, Auto Partition, Disable, Port Speed (10, 100)
Power:
Internal Power Supply, (100 - 240V, 50/60Hz)
Dimensions:
324 x 231 x 55 mm / 12.75" x 9.09" x 2.16" (L x W x H)
Weight:
2.5 Kg / 5.5 lb.
Temperature:
Operating: -10° to 55° C / 14° to 131° F
Storage: -25° to 80° C / -13° to 176° F
Humidity:
10% to 90% (non-condensing)
Certification:
FCC, UL, VCCI, CSA, C-tick, TUV, CE
Benefits
Upgradeable:
Ethernet workgroups can be upgraded to Fast Ethernet without changing hubs.
Expandable:
Stack up to 80 users per stack.
Flexible:
All 10 and 100Mbps users can exist on one hub.
Cost Effective:
Provides 10Mbps, 100Mbps hub and 10/100 switch functionality in one unit.
Performance:
Full 100Mbps connectivity significantly boosts network performance.
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.