Dateiname: Utility_TE100-P2U1P.zip
SHA-1 Checksum: F8CA3C769BE8EF9FFCCD0B381ADA06BDEDBCF90A
Datum
7/25/2017
Dateigröße
5.24 MB
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Date: 7-12-2005
Dateiname:
Firmware_TE100P2U1P_6.10.17W Build0082.zip
Description:
MPS17TRE.BIN (5-3-2004) TE100-P2U1P Firmware 6.10.17 7-12-2005
Release Note:
Update from 6.9.17
1. Added "SMB over TCP/IP" support.
Firmware Upgrade Instruction:
1. Save the new firmware file on to hard disk.
2. Open web browser and go to print server's IP address.
3. From the web config page, click on "MISC", click on "upgrade from browser", click on "browse" to locatethe new firmware file, and then click on "upgrade".
Dateiname: Firmware_TE100P2U1P_6.10.17W_Build0082.zip
SHA-1 Checksum: 2118D915FC824950F08CDC2D83E7C1BF9C79E8E8
Datum
7/25/2017
Dateigröße
248.35 KB
Dateiname: Spec_TE100-P2U1P(English).pdf
Datum
1/3/2005
Dateigröße
173.84 KB
Dateiname: Spec_TE100-P2U1P(French).pdf
Datum
1/17/2005
Dateigröße
303.48 KB
Dateiname: Spec_TE100-P2U1P(German).pdf
Datum
2/7/2005
Dateigröße
197.75 KB
Dateiname: Spec_TE100-P2U1P(Portuguese).pdf
Datum
2/25/2005
Dateigröße
196.14 KB
Dateiname: Spec_TE100-P2U1P(Spanish).pdf
Datum
2/18/2005
Dateigröße
196.68 KB
Dateiname: QIG_TE100-P2U1P.pdf
Datum
5/2/2013
Dateigröße
1.66 MB
Dateiname: UG_TE100-2U1P.pdf
Datum
8/19/2004
Dateigröße
3.62 MB
Dateiname: FAQ_TE100P2U1P_P1P_P1U.pdf
Datum
6/27/2006
Dateigröße
641.31 KB
JPEG Image
Dateigröße: 399.84 KB
Datum: 9/1/2004
Download
TIFF Image
Dateigröße: 3.52 MB
Datum: 9/1/2004
Download
JPEG Image
Dateigröße: 392.41 KB
Datum: 5/4/2005
Download
TIFF Image
Dateigröße: 3.29 MB
Datum: 5/4/2005
Download
Toner status, paper level, etc., will not be communicated back to the PC. In order to get printer status information, the proprietary printer driver has embedded code that needs to be passed on to the print server, decoded, then interpreted by the print server. TRENDnet print servers do not support ...
For the TEW-P1P/U the port name is lp1. For the P2U1P the port names are lp1 for the parallel, lp2 for the top USB and lp3 for the bottom USB. They are case sensitive....
Yes, but you must assign the print server an IP address from a Windows based operating system first. Once that is done you can use LPR or LPD printing for the Macs and you can manage the print server by entering its IP address into a web browser. Also the printer must be a postscript printer....
Step 1 Go to Start>Settings>Printers>Add New Printer (WinXP - Start>Printers
and Faxes>Add a Printer).
Step 2 Select Local Printer. Make sure to uncheck Automatically
detect and install my plug and play printer. Click Next.
Step 3 Select Create a New Port and select Standard
TCP/IP po...
In Windows 98/Me you will need to install the LPR client.
For Windows 98/ME you will also need to know the port name that you are printing
to (For the TEW-P1P/U the port name is lp1. For the P2U1P the port names are
lp1 for the parallel, lp2 for the top usb and lp3 for the bottom usb.
Inst...
Step 1 Open up the PS Admin utility. Highlight your Print server and click on
Properties.
Step 2 Click on TCP/IP tab.
...
If you are using Windows XP you will have to disable the built in firewall. But for all operating systems you have to disable any other form of firewall software such as Norton Internet Security, Black Ice, and Zonealarm....
Hardware |
LAN-Standards: | - IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- ANSI/IEEE 802.3 Auto-Negotiation
|
LAN-Port: | - 10/100 MBit/s UTP/STP RJ-45-Port
|
Druckerschnittstelle: | - USB-1.1-kompatibler Parallelanschluss (Buchse, Typ A, 25-polig)
|
Netzwerkkabel: | - Kat. 3, 4, 5 UTP/STP für 10Base-T (max. 100 Meter)
- Kat. 5 UTP/STP für 100Base-TX (max. 100 Meter)
|
Unterstützte Protokolle: | - TCP/IP, IPX, NetBEUI, AppleTalk und LPR
|
LED-Anzeige: | |
Stromversorgung: | - Externes Netzteil (5V, 2A)
|
Abmessungen (T x B x H): | |
Gewicht: | |
Temperatur: | - Betriebstemperatur: 0 °C bis 50 °C
- Lagertemperatur: -5 °C bis 65 °C
|
Luftfeuchtigkeit: | - Betrieb: 0 - 70 %
- Lagerung: 0 - 80 %
|
Elektromagnetische Verträglichkeit: | - FCC Klasse A, CE Klasse A
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.