Produkt registrieren
Registrieren Sie Ihr Produkt, damit Sie hinsichtlich Produktaktualisierungen und Gewährleistungsinformationen auf dem Laufenden bleiben.
-
In mein Konto einloggen
- | Partner
- |
Deutschland (ändern)
TRENDnetVIEW-Internetkamera für Tag- und Nachtaufnahmen mit Schwenk-/Neigekopf und Zoomfunktion (Certified Refurbished)
RB-TV-IP422 (Version V1.1R)
- Sichtweite bei Nacht bis zu 5 m
- Schwenk- und Neigefunktion deckt größeren Bereich ab
- Von beliebiger Internetverbindung aus seitlich um 330° schwenkbar und in der Höhe um 105° neigbar
- Kostenlose Software mit Funktionen zur Bewegungserkennung und E-Mail-Benachrichtigungen
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: V1.1.0 build 67
Release Date: 2/2011
Note:
- Improve audio quality for live streaming
Note: If you have firmware version 1.1.0 build 66 or older, please update to firmware version 1.1.0 build 67 first. After you have updated the firmware to version 1.1.0 build 67, you can update the firmware to version 1.1.1 build 71.
Dateiname: FW_TV-IP422(1.1.0.67).zip
SHA-1 Checksum: F286CB2E6E8767EAF2C27CB711DCA635F0D9B353
Datum
7/27/2017
7/27/2017
Dateigröße
4.11 MB
4.11 MB
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: V1.1.1 built 73
Release Date: 4/2013
Note:
- Upload.asp removed.
- Updated save configuration file encryption type.
- Set RTSP default authentication to "digest".
Note:
Dateiname: FW_TV-IP422_A1(1.1.1.73).zip
SHA-1 Checksum: 8F38F2801B81ABBFE6D4FBB51310D9D335A6DB8A
Datum
7/27/2017
7/27/2017
Dateigröße
4.51 MB
4.51 MB
Software
Software Version: 2.5.9
Release Date: 4/2017
Notes:
- Fixed TV-IP420P P/T issue
Dateiname: TRENDnetViewPro(2.5.9).zip
SHA-1 Checksum: 7CD1D9AE621816395E9FE9644B651F3696388215
Datum
7/27/2017
7/27/2017
Dateigröße
41.15 MB
41.15 MB
Datenblätter
Dateiname: EN_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
1.07 MB
1.07 MB
Dateiname: FR_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
1.01 MB
1.01 MB
Dateiname: GE_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
1.02 MB
1.02 MB
Dateiname: SP_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
1.09 MB
1.09 MB
Dateiname: RU_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
2.44 MB
2.44 MB
Dateiname: ITA_Spec_TV-IP422(A1.0R).pdf
Datum
12/20/2013
12/20/2013
Dateigröße
1.06 MB
1.06 MB
Kurzanleitung zur Installation
Dateiname: EN_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.02 MB
1.02 MB
Dateiname: FR_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.02 MB
1.02 MB
Dateiname: GE_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.02 MB
1.02 MB
Dateiname: PO_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1,007.09 KB
1,007.09 KB
Dateiname: SP_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.02 MB
1.02 MB
Dateiname: RU_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.82 MB
1.82 MB
Dateiname: EST_QIG_TV-IP422-422W(A1.0R).pdf
Datum
2/18/2009
2/18/2009
Dateigröße
1.02 MB
1.02 MB
Bedienungsanleitung
Dateiname: UG_SecurViewPro.pdf
Datum
6/5/2012
6/5/2012
Dateigröße
4.66 MB
4.66 MB
Dateiname: UG_TV-IP422_TV-IP422W(A2.21).pdf
Datum
4/26/2010
4/26/2010
Dateigröße
3.96 MB
3.96 MB
Produktbild(er)
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
The files cannot be accessed through the camera. Dismount the USB memory stick from the camera and connect it to your computer....
The USB page does not automatically update, press Control + F5 simultaneously to refresh the page.
The USB stick may not be formatted in FAT, to check connect USB stick to your computer. Go to My Computer right click on the USB stick go to Properties look for File System....
Unfortunately due to the IR lights causing a reflection from an ensclosures dome when there is not enough light we do not recommend using the TV-IP422 (w) in an enclosure....
No, unfortunately the IR lights do not have a manual switch. They will activate automatically when there is not enough light....
Log into the camera and click on Setup then click on Event Server>Network Storage on the left hand side. Enter your Samba server information here.
After applying the Samba server information click on Event Config on the left hand side. You have three options, Motion Detection, Schedule...
The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names.
Unfortunately the camera does not support SSL. If the email provider requires SS...
TRENDnet offers TREDnet VortexIP, an advanced Server-based IP camera management software solution designed for small, medium and large enterprise applications and packed full of advanced security features. You can find more information regarding TRENDnet VortexIP here.
https://www.TRENDnet.com...
Unfortunately the cameras from different families do not share a common, free, application and cannot be used together. SecurView cameras will not function in IPView Pro and vice versa.
We do offer TRENDnet VortexIP as a software solution for our cameras. You can find information regarding TREND...
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
Unfortunately SecurView is not compatible with Macintosh operating systems.
The camera can be configured from a Macintosh through its web-based configuration page. The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering htt...
The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30. You can use the IP Setup Utility to find and change the IP address of the camera as well.
...
Log into the camera and click on Setup. Click on Motion Detect on the left hand side. On this page you can setup two motion detection windows. Under "Window" you can select either 1 or 2. Place a check in "Enable" to turn on motion detection. You can adjust the threshold for each window indi...
Warning:
Firmware upgrade failure may permanently damage the unit and cause it to malfunction. Do not interrupt the firmware upgrade process by disconnecting it from the network or unplugging its power from the power outlet once the firmware upgrade process has begun. Never perform a firmware upgr...
The TV-IP422 (w) is not a PoE device. However, you can use an injector and splitter combination for a PoE solution.
Injector: TPE-101ihttps://www.TRENDnet.com/products/product-detail.asp?prod=105_TPE-101I
Splitter: TPE-102shttps://www.TRENDnet.com/products/product-detail.asp?prod=100_TPE-1...
Log into the camera and click on Setup then click on Event Server>Email on the left hand side. Enter your email server and user information here.
After applying the email server information click on Event Config on the left hand side. You have three options, Motion Detection, Scheduled...
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applying the FTP server information click on Event Config on the left hand side. You have three options, Motion Detection, Scheduled uploading and ...
Once you have the camera configured on your network start SecurView. Click on the "Settings" button then click on the "Add Camera" button. It will search your network for any supported cameras and display a list of them. Highlight the camera you want to view in SecurView then click "Add Camera".
...
The supported browsers are Internet Explorer 6.0 or above.
Please refer to our Camera Helper to determine what hardware specs would be recommended for the amount of cameras and frame rate you require.
https://TRENDnet.com/camerahelper...
Press and hold in the reset button on the back of the camera for approximately 10 seconds while the power is on to restore the factory default settings. ...
The top LED is a power light. It should be a steady orange light when power is applied to the camera. The bottom LED is a link light. It should be green and blinking when sending and receiving data. ...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup
-Click Basic>User
You can define th...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup.
-Click Network>Wireless.
-Click th...
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address. The camera will update the DDNS record to reflect the new IP address. This ensures that each time you go to the hostn...
You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView using the public IP address.
Refer to your rou...
Due to the heavy load placed on the CPU TRENDnet does not recommend running CPU usage over 70%.
With the following computer specs we would recommend no more than 6 cameras.
Intel Core Duo 2.5GHz, 2GB Memory, Nvidia GeForce 7100 256MB, 640 x 320 VGA view
With higher system specs you can run...
The camera is set by default for indoor lighting conditions. If the camera is placed within an environment with bright lighting please change the Light Frequency to "Outdoor". This should resolve the issue.
Open the camera's configuration page using web browser (e.g. https://192.168.10.30) and ...
| Camera Specifications | |
| Bildsensor | |
| Sensor | 1/4" Farb-CMOS-Sensor |
Auflösung | 640 x 480 pixel |
Fixierte Linse | f: 4,0mm, F: 2,8 (IR-Objektiv) |
Sichtwinkel | 64° |
Mindestbelichtung | 0 Lux |
| Audio | |
| Mikrofoneingang | intern omnidirektional Empfindlichkeit: -48dB ± 3dB Reaktionsfrequenz: 50 bis 16000 Hz |
| Audio-Ausgang | Lautsprecherbuchse 3,5 mm |
| Format | PCM/AMR (mono) |
| Video-/Bildeinstellung | |
Video-Format | MPEG-4 (einfaches Profil) MJPEG |
Bildfrequenz | 30fps @VGA, QVGA, QQVGA |
Einstellung der Bildfrequenz | 1 bis 30 (Bilder pro Sekunde) |
Einstellung der Kompressionsrate | 5 Stufen |
Auflösung | 640 x 480, 320 x 240, 160 x 120 |
| Digitaler Zoom | 3x |
Belichtungsregelung, Weißabgleich, | Automatisch |
Bildeinstellung | Helligkeit, Kontrast und Sättigung regelbar |
Bildwechsel | vertikal/horizontal |
Lichtfrequenz | 50 Hz, 60 Hz oder im Freien |
| Schwenken/Neigen | |
| Schwenkradius | +165° bis -165° |
| Neigeradius | +90° bis -15° |
| Voreingestellte Positionen | 8 Positionen |
| Möglichkeit zur Regelung | nach oben, nach unten, links, rechts, Mitte |
| Kommunikation | |
| LAN | 10/100 MBit/s Auto-MDIX |
| Protokolle | TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP |
| Hardware Specifications | |
| System | |
| CPU | ARM9 base |
| RAM | 32 MB SDRM |
| ROM | 8 MB NOR-Flash |
Betriebssystem | Linux |
| Systemanforderungen (Webkonfiguration) | |
| CPU | Pentium III 350 MHz oder höher |
| Speichergröße | 128 MB oder mehr |
Auflösung | 800 x 600 oder höher |
| Browser | Internet Explorer 6.0 oder höher |
Unterstützte Betriebssysteme | Windows 2000/XP/Vista |
| Systemanforderungen (Software TRENDnetVIEW™) | |
| CPU | Pentium4, 1GHz oder höher |
| Speichergröße | 512MB oder mehr |
| Auflösung | 1024 X 768 oder höher |
| Unterstützte Betriebssysteme | Windows 2000/XP/Vista |
| Physikalische Eigenschaften / Umgebungsanforderungen | |
Abmessungen | 115 x 110 x 105 mm |
Gewicht | 330g |
Stromversorgung | Externes Netzteil (12 V Gleichstrom, 1,5 A) |
Leistungsaufnahme | 6 Watt (Max.) |
| LEDs | Stromversorgung (Orange), Link (Grün) |
| IR Wellenlänge | 940nm |
| Temperatur | Betrieb: 0 ºC bis 45 ºC Lagerung: -10 ºC bis 60 ºC |
| Sonstiges | |
| USB-Port | USB 1.1 (Typ A) Maximale Spannung 500 mA. Unterstützt Festplatten FAT 16/32 |
| Allgemeiner Ein-/Ausgang | 1 Eingang und 1 Ausgang |
| IR-Sensor | Normaler Modus: 2,5 Lux Nachtsichtmodus: 0,5 Lux IR-LED aktiviert: 0 Lux Lichtsensor löst IR-LED aus: 5 Lux |
| PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
