Unfortunately the USB ports on the Multi-Function Print Server do not support USB hubs.
Performance
server mode
FTP
server mode
SMB
NetUSB mode
San Disk CF Card,Write
25 Mbit/sec
14 Mbit/sec
18 Mbit/sec
San Disk CF Card,Read
18 Mbit/sec
12 Mbit/sec
15 Mbit/sec
2.5" USB HDD, Write
26 Mbit/sec
16 Mbit/sec
...
Yes. The Multi-Function Print Server does support FTP protocol for remote access using the MFP Server Control Utility. Further instructions can be found on page 49 of the User Manual....
The goal of TE100-MP1U/TE100-MP2U/TEW-MP2U USB MFP Server is to provide print/scan/fax/file server sharing in a single product. There is no industry standard to network popular multifunction printers. We have developed a new technology, called "NetUSB", to solve this problem. TE100-MP1U/TE100-MP2U/T...
This product supports FAT12/16/32 and NTFS file formats. However, the "write" operation on NTFS is only supported in NetUSB mode....
No you can use the standard Windows LPR Printing Protocol that is integrated in Windows operating system. You will still need to install device driver that comes with your multi-function printer. You can find step by step instructions for this setup on page 24 of the User Manual....
No. Our Multi-Function Print Servers come with a Quick Install Guide, which walks you through the entire installation process. It does help to have some experience in setting up network devices, but definitely not required....
No, the antenna is fixed to the device.
TEW-MP2U is the best choice in this scenario because it will detect if a network cable is plugged-in or not. If a network cable is plugged-in, TEW-MP2U will always connect to the network through the network cable. Otherwise it will always connect to the network through wireless module. Once the TEW-...
Yes, TRENDnet's USB Multi-Function Print Servers have been verified to be Windows Vista compatible.
These devices are designed to connect your All-In-One/Multifunction Printers, Print-only Printers, and USB Mass Storage (Hard Drives, Flash Drives, and Memory Card Readers) to your network, allowing all network users access to these shared USB devices resources....
Multi-Function Print Servers, or MFP Servers, are used to share not only your printing tasks, but now your scanning, faxing, copying, and storage functions all on the data network. MFP Servers differ from conventional print servers primarily because single-function print servers are only capable of ...
Hardware |
Standards | - IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
|
Druckerschnittstelle | - Mit USB 2.0, 1.1 kompatibler USB-Port Typ A
|
LAN-Port | - 10/100 MBit/s UTP/STP-Ethernet-Port mit Auto-Negotiation
|
Prozessor / SDRAM / Flash-ROM | - RDC R3210-G 150 MHz / 8 MB /2 MB
|
USB-Speicher | - NetUSB-Modus: Einzelnutzerzugriff, FAT12/16/32 (Lesen/Schreiben) und NTFS (Lesen/Schreiben)
- Servermodus (FTP/SMB-Server): Zugriff mehrerer Nutzer. FAT12/16/32 (Lesen/Schreiben) und NTFS (Lesen)
|
Diagnose-LEDs | - Stromversorgung, Link, Status, USB1, USB2
|
Übertragungsprotokolle | |
Unterstützte TCP/IP-Protokolle | |
Unterstützte Betriebssysteme | - Windows 2000/XP (32/64-bit)/2003 Server/Vista (32/64-Bit)
|
Ansteuerung | - Windows-Programm oder webbasierte Konfiguration
|
Stromversorgung | - Externes Schaltnetzteil (12 V Gleichstrom, 1 A)
|
Leistungsaufnahme | - Max. 2,5 W (ohne Peripheriegerät)
|
Abmessungen | |
Gewicht | |
Temperatur | - Betrieb: 0 °C bis 50 °C
- Lagerung: -25 °C bis 55 °C
|
Luftfeuchtigkeit | - 10 bis 90 % (nicht kondensierend)
|
Zulassungen | |
PACKUNGSINHALT |
- TE100-MP2U
- Kurzanleitung zur Installation
- Programm-CD
- Netzteil (12V DC, 1A)
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.