Produkt registrieren
Registrieren Sie Ihr Produkt, damit Sie hinsichtlich Produktaktualisierungen und Gewährleistungsinformationen auf dem Laufenden bleiben.
-
In mein Konto einloggen
- | Partner
- |
Deutschland (ändern)
Wireless-N300 Hotspot Access Point
TEW-636APB (Version V1.0R)
- 12-fache Geschwindigkeit und 6-fache Reichweite von Wireless-G
- Fortgeschrittene MIMO-Antennentechnologie erweitert Reichweite und beseitigt alle Funklöcher
- Funktioneller Access Point und WDS Bridge-Modus bieten erhöhte Netzwerk-Flexibilität
DISCONTINUED PRODUCT
The TEW-636APB (Version V1.0R) has been discontinued.
It has been replaced by the TEW-821DAP (Version v2.5R).
For a list of discontinued products, click here. Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: v1005
Release Date: 11/17/2008
Release Note:
- Add DHCP Client
- Improved wireless connection
Dateiname: FW_TEW-636APB_v1.x(1.0.0.5).zip
SHA-1 Checksum: 62E9D349445998676CFD01FDDD3DF0C3339042A4
Datum
7/26/2017
7/26/2017
Dateigröße
3.16 MB
3.16 MB
Datenblätter
Dateiname: EN_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
476.05 KB
476.05 KB
Dateiname: FR_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
482.13 KB
482.13 KB
Dateiname: GE_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
482.09 KB
482.09 KB
Dateiname: SP_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
481.25 KB
481.25 KB
Dateiname: RU_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
1.51 MB
1.51 MB
Dateiname: ITA_Spec_TEW-636APB(V1.0R).pdf
Datum
9/17/2008
9/17/2008
Dateigröße
475.45 KB
475.45 KB
Kurzanleitung zur Installation
Dateiname: EN_QIG_TEW-636APB(V1.0R).pdf
Datum
6/4/2008
6/4/2008
Dateigröße
835.96 KB
835.96 KB
Dateiname: FR_QIG_TEW-636APB(V1.0R).pdf
Datum
6/4/2008
6/4/2008
Dateigröße
857.56 KB
857.56 KB
Dateiname: GE_QIG_TEW-636APB(V1.0R).pdf
Datum
6/4/2008
6/4/2008
Dateigröße
880.84 KB
880.84 KB
Dateiname: PO_QIG_TEW-636APB(V1.0R).pdf
Datum
7/7/2008
7/7/2008
Dateigröße
816.49 KB
816.49 KB
Dateiname: SP_QIG_TEW-636APB(V1.0R).pdf
Datum
6/4/2008
6/4/2008
Dateigröße
840.60 KB
840.60 KB
Dateiname: RU_QIG_TEW-636APB(V1.0R).pdf
Datum
6/4/2008
6/4/2008
Dateigröße
1.53 MB
1.53 MB
Bedienungsanleitung
Dateiname: UG_TEW-636APB.pdf
Datum
6/13/2008
6/13/2008
Dateigröße
13.26 MB
13.26 MB
Produktbild(er)
The TEW-636APB can support up to 32 wireless client connections per one Access Point.
No, no software or utility is required to allow this product to work. The TEW-636APB is completely ready to use out of the box (Note: please refer to Quick Installation Guide that is included with this product)....
I am not getting that many bars on my wireless signal, what can I do to improve the wireless signal?
When using the TEW-636APB from time to time you may experience issues with wireless signal loss or no signal, this is due to environmental conditions in and out of any structure or objects in the way. Since wireless is based on line of sight. The wireless signals do not pass through objects, walls o...
No, the Internet works independently from the wireless Access Point and Local Area Network (LAN). Your Internet Service Provider controls your Internet speed. ...
Yes, the TEW-636APB is fully compatible with WDS. In the AP Modes; you can add additional Access Point(s) to extend your coverage of your wireless network. (Note: AP Modes will support the use of wireless b/g/n to extend the wireless LAN. The use of multiple Access Points will reduce the overall net...
Yes, the TEW-636APB allows you to create up to three additional virtual SSIDs (Wireless Network Name) to connect with. Multiple Service Set Identifiers (SSID) allow the ability to create virtual wireless networks while only using one wireless Access Point device as the main connecting point. Create ...
The TEW-636APB supports the following security for wireless networks, WEP, WPA/WPA2, WPA/WPA2 Enterprise, Wireless MAC filtering, and WiFi Protected Setup (WPS)....
Yes, the TEW-636APB is fully compatible with existing 802.11b/g/n wireless networking devices.
The TEW-636APB has two built in wireless radios for transmitting and receiving at the same time.
Rogue AP detection is a security feature that will let you know if someone has connected an Access Point that is not authorized or belong to your current LAN. Once configured, this feature can monitor your wireless network for any new Access Points operating in your WLAN. Once detected, you can add ...
Virtual LAN, a network of computers that behave as if they are connected to the same wired network even though they may actually be physically located on different parts on a LAN. The TEW-636APB allows you to create VLAN to separate wireless client from each other while connecting to the same TEW-63...
802.11d (worldwide mode) is a wireless network communications specification for use in countries where systems using other standards in the 802.11 variations are not allowed to operate. This will allow the TEW-636APB to communicate in countries where there are different restrictions on wireless radi...
Yes, the user settings can be safely stored off the TEW-636APB and re-applied to the device in the event of updating the firmware or restoring the device default settings....
Here are minimum operating requirement for the TEW636APB:
Web Browser: Internet Explorer (5.5 or higher)
A computer with a network adapter or wireless adapter properly installed.
DHCP Server
A RJ-45 network cable.
TEW-621PC version 2 or TEW-623PI version 2 (Optional)
...
Open your web browser, type https://SCXXXXXX, in the Address bar, and then press Enter. XXXXXX represents the last 6 digits of the Mac Address. You can find the Mac Address on the bottom of the router. ...
| Hardware | |
| Standards | Verdrahte: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) Drahtlos: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Schnittstelle | 1 x 10/100Mbps Auto-MDIX LAN Port |
| Rücksetztaste | Stellt alle Einstellungen auf Herstellerstandard zurück |
| Konfigurationstaste | Für WPS-Funktion reserviert |
| LED-Anzeige | WPS, Stromversorgung, WLAN, Status |
| Netzteil | Externes Netzteil (12 V Gleichstrom, 1 A) |
| Abmessungen (L x B x H) | 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 inches) |
| Gewicht | 320g (0.7 lbs) |
| Temperatur | Betrieb: 0°~ 40°C (32°F~ 104°F) Lagerung: -20°~ 60°C (-4°F~140 °F) |
| Luftfeuchtigkeit | Max. 90% (nicht kondensierend) |
| Zulassungen | CE, FCC |
| Drahtlose Verbindung | |
| Frequenzbereich |
|
| Modultechnik |
|
| Antenne | 3 abnehmbare 2dBi-Dipolantennen |
| Medienzugriffsprotokoll | CSMA/CA mit ACK |
| Datenrate |
|
| Sicherheit | Verschlüsselung: Hardware AES/TKIP, 64/128-bit WEP (Hex) 802.1X/EAP: WPA/WPA2/802.1X Authentifikator WPA: WPA-PSK/WPA2-PSK, WPA-enterprise, WPA2-enterprise SSID-Broadcaststeuerung |
| Ausgangsleistung |
|
| Empfangsempfindlichkeit |
|
| Kanäle | 1-11 (US) 1-13 (EU) |
| PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
