Enregistrez votre produit
Enregistrez votre produit pour rester informé des dernières mises à jour sur le produit et pour obtenir des informations sur la garantie.
NE PAS faire de mise à niveau d’un firmware sur quelque produit TRENDnet que ce soit à l’aide d’une connexion sans fil. Les mises à niveau de firmware via une connexion sans fil peuvent endommager le produit. Veuillez faire les mises à niveau de firmware uniquement avec un réseau filaire |
Important Note (Please Read First): If you are currently upgrading your device from a firmware version older than version 2.1.3, DO NOT use Internet Explorer(IE) version 8 or 9 web browsers to upgrade this firmware. Web browser compatiblity issues were found in firmware versions older than version 2.1.3 when upgrading to version 2.1.1 or above. Please use an older version of Internet Explorer (i.e. IE7) or use Firefox (i.e. Firefox 7) when upgrading to firmware version 2.1.3. While performing the update, if you receive a “Checking free memory…” notification, please allow the firmware upgrade process to proceed. Do not disconnect the unit or close the web browser for 6 minutes. The LED’s will cycle after the firmware update has completed.
NE PAS faire de mise à niveau d’un firmware sur quelque produit TRENDnet que ce soit à l’aide d’une connexion sans fil. Les mises à niveau de firmware via une connexion sans fil peuvent endommager le produit. Veuillez faire les mises à niveau de firmware uniquement avec un réseau filaire |
Important Note (Please Read First): If you are currently upgrading your device from a firmware version older than version 2.1.3, DO NOT use Internet Explorer(IE) version 8 or 9 web browsers to upgrade this firmware. Web browser compatiblity issues were found in firmware versions older than version 2.1.3 when upgrading to version 2.1.1 or above. Please use an older version of Internet Explorer (i.e. IE7) or use Firefox (i.e. Firefox 7) when upgrading to firmware version 2.1.3. While performing the update, if you receive a “Checking free memory…” notification, please allow the firmware upgrade process to proceed. Do not disconnect the unit or close the web browser for 6 minutes. The LED’s will cycle after the firmware update has completed.
Matériel | |
Normes |
|
Voyants lumineux |
|
Antenne |
|
PoE |
|
EXT (Connecteur pour antenne externe) |
|
Dimensions (L x l x H) |
|
Poids |
|
Consommation |
|
Gestio |
|
Supporte des vents allant jusque |
|
Etanche |
|
Température |
|
Humidité |
|
Protection contre surcharge de courant |
|
Alimentation |
|
Certification |
|
Sans fil | |
Fréquence |
|
Technique de modulation |
|
Débit des données (récupération automatique) |
|
Sécurité |
|
Puissance d'émission |
|
Sensibilité du récepteur |
|
Canaux |
|
CONTENU DE L'EMBALLAGE |
|