Performance
server mode
FTP
server mode
SMB
NetUSB mode
San Disk CF Card,Write
25 Mbit/sec
14 Mbit/sec
18 Mbit/sec
San Disk CF Card,Read
18 Mbit/sec
12 Mbit/sec
15 Mbit/sec
2.5" USB HDD, Write
26 Mbit/sec
16 Mbit/sec
20 Mbit/sec
...
Unfortunately the USB ports on the Multi-Function Print Server do not support USB hubs.
Yes. The Multi-Function Print Server does support FTP protocol for remote access using the MFP Server Control Utility. Further instructions can be found on page 49 of the User Manual....
The goal of TE100-MP1U/TE100-MP2U/TEW-MP2U USB MFP Server is to provide print/scan/fax/file server sharing in a single product. There is no industry standard to network popular multifunction printers. We have developed a new technology, called "NetUSB", to solve this problem. TE100-MP1U/TE100-MP2U/T...
This product supports FAT12/16/32 and NTFS file formats. However, the "write" operation on NTFS is only supported in NetUSB mode....
No you can use the standard Windows LPR Printing Protocol that is integrated in Windows operating system. You will still need to install device driver that comes with your multi-function printer. You can find step by step instructions for this setup on page 24 of the User Manual....
No. Our Multi-Function Print Servers come with a Quick Install Guide, which walks you through the entire installation process. It does help to have some experience in setting up network devices, but definitely not required....
No, the antenna is fixed to the device.
TEW-MP2U is the best choice in this scenario because it will detect if a network cable is plugged-in or not. If a network cable is plugged-in, TEW-MP2U will always connect to the network through the network cable. Otherwise it will always connect to the network through wireless module. Once the TEW-...
Yes, TRENDnet's USB Multi-Function Print Servers have been verified to be Windows Vista compatible.
These devices are designed to connect your All-In-One/Multifunction Printers, Print-only Printers, and USB Mass Storage (Hard Drives, Flash Drives, and Memory Card Readers) to your network, allowing all network users access to these shared USB devices resources....
Multi-Function Print Servers, or MFP Servers, are used to share not only your printing tasks, but now your scanning, faxing, copying, and storage functions all on the data network. MFP Servers differ from conventional print servers primarily because single-function print servers are only capable of ...
Matériel |
Normes | - IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
|
Interface d'imprimante | - Port USB 2.0, 1.1 compatible port USB de type A
|
Port LAN | - Port Ethernet 10/100Mbps UTP/STP à auto-négociation
|
Microprocesseur/SDRAM/Flash ROM | - RDC R3210-G 150MHz / 8MB / 2MB
|
Stockage USB | - Mode NetUSB : Accès utilisateur unique, FAT12/16/32(lecture/écriture) et NTFS (lecture/écriture)
- Mode serveur(serveur FTP/SMB) : Accès utilisateurs multiples. FAT12/16/32(lecture/écriture) et NTFS (lecture)
|
Voyants lumineux de diagnostic | - Alimentation , link, état, USB1
|
Protocole de transport | |
Protocole TCP/IP supporté | |
SE supportés | - Windows 2000/XP/2003 Server/Vista (32 bits)
|
Gestion | - Programme utilitaire basé Windows ou configuration via Internet
|
Alimentation | - Adaptateur secteur externe 12V DC 1A
|
Consommation | - Max 2.5W (sans périphérique)
|
Dimensions | - 80 x 60 x 25mm ( 3,15 x 2,36 x 0,98 pouces)
|
Poids | |
Température | - Fonctionnement : De 0 à 50°C
- Entreposage : De -25 à 55°C
|
Humidité | - Entre 10 et 90%, pas de condensation
|
Certifications | |
CONTENU DE L'EMBALLAGE |
- TE100-MP1U
- Guide d'installation rapide
- CD-ROM avec utilitaire
- Adaptateur secteur (12V DC, 1A)
|
Toutes les références au débit ne sont données qu’à titre de comparaison. Les spécifications, la taille et la forme du produit sont sujettes à modification sans avis préalable, et l’apparence réelle du produit peut différer de celle illustrée ici.