United States  [change]    
Support
Support Technique
Base de Connaisssances
Telecharger les drivers
Politique de garantie produit



KB Questions
What is the maximum cable length for my KVM?
What is the maximum cable length between two daisy-chained KVM switches?
Can I use the KVM Extender (TK-EX2) in between two daisy-chained KVM switches?
Is the TK-1602R wall-mountable?
When searching for a PC by name can I search all daisy-chained KVM switches?
How do I assign names to the KVM ports for easier searching?
What is bank number referring to?
Why would I need to reset my KVM?
How would I reset the TK1602R?
What are console ports and what are they used for?
Where can I purchase compatible cables for my TK-1602R KVM switch?
How many cables come with the TK-1602R?
What is a daisy-chain cable?
How long is the included daisy-chain cable?
What is an OSD?
If your mouse is not responding, not detected or there is a mouse error check the following:
If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
How do I get my mouse to respond after switching from one computer to another?
Can I turn off the ‘beep’ when switching from one computer to another?
What are the hotkey commands for the TRENDnet KVM switch?
What is the hotkey command to switch from one computer to another?
Does my KVM switch support DVI monitors?
What kinds of mice and keyboards are supported?
How do I switch from one computer to another with the KVM switch?
Will the KVM switch restore the keyboard settings when switching between computers?
Can I connect and disconnect the PS/2 cables while the computers are turned on?
Do I need to use the included external AC adapter?
Search:
Browse:
  Enter KB ID#:
Knowledgebase Home Page > KVM > TK-1602R
How do I get my mouse to respond after switching from one computer to another?

Press Scroll lock + Scroll Lock + End to reset the Switch and it should start responding again. If it does not respond disconnect the mouse for approximately 10 seconds then reconnect it. If it’s still not responding reboot the computer.

This questions only needs to go under the TK-801R, TK-802R, TK-1601R and TK-1602R

Knowledgebase ID
951
Created: 3/14/2006
Modified: 3/14/2006
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend
Post a comment
Rate this KB

(1.0)
Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Page d'accueil | Présentation de l’entreprise | Produits | Où Acheter | Nouveautés et Informations | Support | Téléchargement | Partenaires | TRENDnetTV
© Copyright 2013 TRENDnet Tous droits reserves. Nous Contacter | Confidentialité   Connectez-vous à: Facebook Twitter You Tube
Share